QI LCR65RP
Q Acoustics Ekki lengur framleitt

QI LCR65RP

A 2 x 6.5-inch in-wall left/centre/right speaker with a 1-inch swivelling tweeter and a low-profile magnetic grille. It suits home cinema installs where a slim, flush fit is wanted and mounting depth is limited.

  • 2 x 6.5" in-wall LCR speaker
  • 1" swivel tweeter with switchable HF level
  • Power handling 15 - 100W, 8 ohm nominal
  • Sensitivity 87 dB (2.83V, 1m)
  • Max rear depth 85 mm
  • Magnetic low-profile grille
Selja svona

Myndir

8

Auglýsingar

Engar auglýsingar fyrir þetta líkan enn

Þegar einhver selur QI LCR65RP birtast auglýsingarnar og sölusagan hér.

Selja svona

Lýsing

The Q Install LCR 65RP is an in-wall speaker built for left, centre or right channel duty in home theatre systems. It uses two 6.5-inch low-frequency drivers with mass-damped polypropylene cones and high-powered coil and magnet assemblies, paired with a 1-inch silk dome tweeter protected by a mesh.

The tweeter swivels so the high-frequency direction can be adjusted, and a switchable high-frequency level setting allows further tuning to the room. High-order crossovers are used for a smooth transition between drivers, with the mid-range tuned to keep speech clear. The unit needs only a shallow mounting depth of 85 mm, and the low-profile grille attaches magnetically.

It is a passive speaker with a nominal 8 ohm impedance and 15-100 W program power handling, so it needs an A/V receiver or power amplifier. It belongs to the Q Install in-wall range, which also includes 8-inch and 6.5-inch two-way units and a passive 8-inch subwoofer for extra bass.

Tækniupplýsingar

Framleiðandi
Q Acoustics
Líkan
QI LCR65RP
Flokkur
Hi-Fi og heimilishljóð › Hátalarar

Audio

Configuration
2 x 6.5" in-wall LCR speaker
Tweeter type / diameter
Swivel / 1" (25mm)
Woofer diameter
6.5"
Impedance (nominal)
8 ohms
Sensitivity (2.83V, 1m)
87 dB SPL (switchable HF)
Low frequency response (-3 dB)
65 Hz
Power handling (program)
15 - 100W

Physical

Max rear depth
85 mm
Grille size (round / square)
511 mm x 221 mm
Cutout (nominal)
483 mm x 193 mm
Grille type
Low-profile magnetic
Mounting
In-wall

Drivers

Low frequency driver cone
Nano Particle mass damped polypropylene
Tweeter dome
Silk, mesh protected
Tweeter adjustment
Swivel, with HF level adjustment
Crossover
High order

Gögn: qacoustics.co.uk; myndir: Q Acoustics product page · uppfært 2026-10-13 · Fannstu villu? Skrifaðu okkur