Q SUB100
Active 10-inch sealed subwoofer with built-in DSP, adjustable low-pass filter and phase/delay controls. Aimed at medium-sized rooms and home cinema or stereo systems built around passive speakers.
- 10 in (254 mm) driver in a sealed infinite-baffle cabinet
- Built-in DSP with automatic stereo/mono source detection
- Low-pass filter adjustable from 40 Hz to 250 Hz
- Phase inversion switch and delay adjustment
- Frequency response 32 Hz – 250 Hz (-6 dB)
- Satin Black or Satin White finish
Fotók
8Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Q SUB100 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Q SUB100 is a powered subwoofer with a 254 mm paper-cone driver in a sealed (infinite baffle) cabinet. Because there is no port, it can sit close to walls and furniture. The cabinet is built from 18 mm MDF with a 36 mm double-thickness baffle and internal dart bracing. It is offered in Satin Black with a black grille or Satin White with a grey grille.
A custom amplifier module combines DSP, power amplifier and power supply, using four digital amplifier stages in a parallel bridge-tied load configuration. The DSP detects whether the incoming signal is stereo or mono and its level, then adjusts gain automatically. Phase inversion and delay adjustment help align the subwoofer with the main speakers, and the low-pass filter is adjustable from 40 Hz to 250 Hz.
It takes a line-level input, with a 20 kΩ input impedance, from a preamp, active speakers or a home cinema system. The box includes four spikes with locking nuts and covers, a mains cable and a user manual.
Videó
Műszaki adatok
- Márka
- Q Acoustics
- Modell
- Q SUB100
- Kategória
- Hi-Fi és otthoni hang › Hangfalak
Audio
- Enclosure type
- Infinite baffle
- Bass unit diameter
- 254 mm (10 in)
- Effective volume
- 23.5 litres
- Max SPL @ 1 m
- 111 dB
- Frequency response (-6dB)
- 32 Hz – 250 Hz
- Low pass crossover range
- 40 Hz – 250 Hz
- Voice coil diameter
- 38 mm
Amplifier
- Peak amplifier power
- 500 W
- Continuous amplifier power
- 250 W
- THD @ rated power
- 0.09%
- Amplifier stages
- 4 digital stages, PBTL configuration
Inputs
- Input sensitivity (max gain)
- 300 mv rms
- Maximum input level
- 2.1 V rms
- Input impedance
- 20 kΩ
- Noise floor (A wtd)
- 50 μV
Physical
- Dimensions (HxWxD)
- 350 x 350 x 382 mm (13.7 x 13.7 x 15 in)
- Weight (per loudspeaker)
- 16.7 kg (36.8 lbs)
- Cabinet material
- 18 mm MDF, 36 mm baffle
- Finishes
- Satin Black (black grille), Satin White (grey grille)
In the box
- Subwoofer
- 1 x Q SUB100 Active Subwoofer
- Feet
- 4 x Spikes, Locking Nuts and Spike Covers
- Cable
- 1 x Mains Cable
- Documentation
- 1 x User Manual