Concept 500
A large floorstanding speaker pair from the top of the Concept range, with a 28 mm tweeter and two 165 mm mid/bass drivers per speaker in a damped, braced cabinet. It suits listeners building a high-end stereo system who want an easy-to-drive load.
- Two-way floorstander sold as a pair
- 2 x 165 mm mid/bass plus 28 mm tweeter per speaker
- Frequency response 41 Hz - 30 kHz
- Gelcore cabinet with P2P bracing and HPE tubes
- Bi-wire terminals; HF trim of ±0.5 dB via links
- Black & Rosewood or White & Light Oak finish
Fotos
6Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um Concept 500, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The Concept 500 is a two-way floorstanding loudspeaker sold as a pair, with a 41 Hz to 30 kHz frequency response. Each speaker has a 28 mm high-frequency unit and two 165 mm mid/bass drivers, with a crossover at 2.5 kHz. Average impedance is 6 Ω, dipping to 3.7 Ω, and the recommended amplifier power is 25 to 200 W. Links on the rear adjust the high frequencies by plus or minus 0.5 dB.
The cabinet is built to reduce resonance. Gelcore construction uses a non-setting gel between layers to turn high-frequency vibration into heat. Point-to-Point bracing stiffens the panels, and Helmholtz Pressure Equalizer tubes relieve internal pressure that could cause standing waves. The tweeter sits in a sealed, decoupled enclosure, and the drivers are baffle-mounted.
Each speaker has bi-wire terminals on the rear, so two pairs of cable can run from the amplifier, one for highs and one for mid and low frequencies. Finishes are gloss black with rosewood or gloss white with light oak, with real Italian veneer at the rear. Grilles, spike feet and ball-end feet are included.
Vídeo
Especificações
- Marca
- Q Acoustics
- Modelo
- Concept 500
- Categoria
- Hi-Fi e áudio doméstico › Colunas
Audio
- Frequency response
- 41 Hz - 30 kHz
- Average impedance
- 6 Ω
- Minimum impedance
- 3.7 Ω
- Recommended power
- 25 - 200 W
- Distortion (120 Hz - 20 kHz)
- 0.2 %
- Crossover frequency
- 2.5 kHz
- High frequency adjustment
- + or - 0.5 dB via links
Drivers
- Mid bass driver
- 2 x 165 mm
- High frequency unit
- 28 mm
Connectivity
- Speaker terminals
- Bi-wire
Physical
- Size (H x W x D), cabinet
- 1150 x 400 x 350 mm (45.3 x 15.7 x 14.8 in)
- Size (H x W x D), overall
- 1175 x 400 x 375 mm (46.2 x 15.7 x 14.8 in)
- Weight
- 42kg (92.6 lbs)
- Finishes
- Black & Rosewood; White & Light Oak
- Shipping
- Shipped in two boxes
In the box
- Speakers
- 2 x Concept 500 floorstanding speaker
- Speaker grilles
- 2
- Spike feet
- 8
- Ball-end feet
- 8
- Foam bungs
- 2
- Jumpers
- 2
- Owner's manuals
- 2
- Cleaning cloths
- 2