Concept 300
Large two-way standmount speaker pair from the Concept series, with a 165mm mid/bass driver and 28mm tweeter in a layered, braced MDF cabinet. Offered with or without the matching Tensegrity stands, for hi-fi listeners who want a compact flagship speaker.
- 2-way reflex standmount, sold as a pair
- 165mm mid/bass driver and 28mm tweeter
- Frequency response 55Hz - 30kHz
- Bi-wire/bi-amp terminals; 4mm banana, spade or bare wire
- Dual Gelcore and Point 2 Point cabinet damping
- Optional Tensegrity stands with isolation base
Zdjęcia
5Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Concept 300, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The Concept 300 is a two-way reflex standmount loudspeaker sold as a pair. Its MDF cabinet uses point-to-point bracing for low-frequency vibrations and a three-layer construction separated by a non-setting gel that turns high-frequency vibration into heat. The finish is multiple gloss lacquer coats combined with real-wood veneer, offered as Black & Rosewood or White & Light Oak.
The 165mm mid/bass cone is impregnated paper with a rubber surround, a 35mm glass fibre voice coil and a ferrite magnet. The 28mm tweeter uses coated microfibre, is decoupled from the cabinet by a rubber gasket and has a shallow horn-shaped front plate. Both drivers are fixed from behind with spring-tensioned bolts, so no bolt heads show on the baffle.
A sprung isolation base plate carries the speaker on four springs. It is designed to pair with the Tensegrity stand, a tripod of stainless steel rods and cables, available as a bundle or bought without stands. The rear panel has electrically isolated terminals for bi-wiring or bi-amping, accepting bare wire, spade connectors or 4mm banana plugs.
Wideo
Specyfikacja
- Marka
- Q Acoustics
- Model
- Concept 300
- Kategoria
- Hi-Fi i audio domowe › Głośniki
Audio
- Enclosure type
- 2 way reflex
- Mid/bass driver
- 165mm
- High frequency unit
- 28mm
- Frequency response
- 55Hz - 30kHz
- Nominal impedance
- 6ohms
- Minimum impedance
- 4.7ohms
- Sensitivity
- 84dB
- Crossover frequency
- 2.5kHz
- Effective volume
- 11.4L
Power
- Stereo amplifier power
- 25-200w
Connectivity
- Speaker terminals
- Bi-wire / bi-amp, electrically isolated
- Accepted connectors
- Bare wire, spade connectors or 4mm banana plugs
Physical
- Cabinet dimensions H/W/D
- 355 x 200 x 400 mm (14 x 7.9 x 15.7 in)
- Speaker on stand dimensions H/W/D
- 690 x 492 x 430 mm (27.2 x 19.4 x 16.9 in)
- Speaker weight
- 14.5kg (per speaker)
- Carton dimensions H/W/D
- 320 x 500 x 520mm
- Packaged weight
- 16.6kg (per speaker)
- Finishes
- Black & Rosewood; White & Light Oak
Tensegrity Stand
- Stand dimensions H/W/D
- 492 x 690 x 430mm
- Stand weight
- 3.9kg (per stand)
- Stand carton dimensions H/W/D
- 740 x 780 x 460mm
- Stand packaged weight
- 12.3kg (pair)
In the box
- Speakers
- 2 x Concept 300 standmount speaker
- Accessories
- 2 x Foam Bung, 2 x Speaker Grille, 2 x Jumper, 2 x Cleaning Cloth
- Documentation
- 2 x Owner's Manual