Pick it MM E
Pro-Ject Utgått

Pick it MM E

Entry-level moving-magnet phono cartridge with a conical diamond stylus and a lightweight ABS body. It suits vinyl listeners who want an affordable, general-purpose cartridge for a turntable with a half-inch mounting.

  • Moving-magnet (MM) cartridge
  • Conical diamond stylus
  • Low-mass system with neodymium magnet
  • Damped ABS body, 5.5 g
  • Output 3.8 mV at 1 kHz
  • Tracking force 2.0 g recommended
Selg en slik

Bilder

8

Annonser

Ingen annonser for denne modellen ennå

Når noen selger en Pick it MM E, vises annonsene og salgshistorikken her.

Selg en slik

Beskrivelse

The Pick it MM E is a moving-magnet cartridge that converts record grooves into an electrical signal. It uses a low-mass generator system built around a miniature neodymium magnet, which lowers inertia and improves tracking. The stylus is a conical diamond, and the stylus is shielded by a protective design.

The body is made from resonance-optimised ABS and the cartridge weighs about 5.5 g. The highly damped housing is intended to reduce vibration-induced coloration and keep background noise low, making it a general-purpose option for a wide range of records.

It mounts to a tonearm headshell using the 1/2 inch standard. Output voltage is 3.8 mV at 1 kHz, the recommended tracking force is 2.0 g within a 1.8 to 2.2 g range, and the recommended load resistance is 47 kΩ. Frequency response is 10 to 20,000 Hz within ±2 dB.

Video

Spesifikasjoner

Merke
Pro-Ject
Modell
Pick it MM E
Kategori
DJ-utstyr › Pickuper og nåler

Audio

Cartridge principle
MM (Moving-Magnet)
Output voltage at 1 kHz
3,8 mV (3,54 cm/sec)
Frequency response
10 - 20 000 Hz +/- 2dB
Tracking ability at 315Hz
70 μm
Dynamic compliance
14 μm/mN

Stylus

Stylus type
Conical
Tracking force, range
1,8 - 2,2 g (mN)
Tracking force, recommended
2,0 g (mN)
Tracking angle
23°

Connectivity

Mounting standard
1/2 inch
Recommended load resistance
47 kΩ

Physical

Height stylus tip to top mounting surface
18,2 mm
Cartridge weight
5,5 g
Body material
Resonance optimized ABS
Generator magnet
Miniature neodymium

Data: project-audio.com; bilder: Pro-Ject product page · oppdatert 2026-10-11 · Fant du en feil? Skriv til oss