Pick it MM E
Entry-level moving-magnet phono cartridge with a conical diamond stylus and a lightweight ABS body. It suits vinyl listeners who want an affordable, general-purpose cartridge for a turntable with a half-inch mounting.
- Moving-magnet (MM) cartridge
- Conical diamond stylus
- Low-mass system with neodymium magnet
- Damped ABS body, 5.5 g
- Output 3.8 mV at 1 kHz
- Tracking force 2.0 g recommended
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao Pick it MM E, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The Pick it MM E is a moving-magnet cartridge that converts record grooves into an electrical signal. It uses a low-mass generator system built around a miniature neodymium magnet, which lowers inertia and improves tracking. The stylus is a conical diamond, and the stylus is shielded by a protective design.
The body is made from resonance-optimised ABS and the cartridge weighs about 5.5 g. The highly damped housing is intended to reduce vibration-induced coloration and keep background noise low, making it a general-purpose option for a wide range of records.
It mounts to a tonearm headshell using the 1/2 inch standard. Output voltage is 3.8 mV at 1 kHz, the recommended tracking force is 2.0 g within a 1.8 to 2.2 g range, and the recommended load resistance is 47 kΩ. Frequency response is 10 to 20,000 Hz within ±2 dB.
Videozapis
Specifikacije
- Marka
- Pro-Ject
- Model
- Pick it MM E
- Kategorija
- DJ oprema › Gramofonske glave i igle
Audio
- Cartridge principle
- MM (Moving-Magnet)
- Output voltage at 1 kHz
- 3,8 mV (3,54 cm/sec)
- Frequency response
- 10 - 20 000 Hz +/- 2dB
- Tracking ability at 315Hz
- 70 μm
- Dynamic compliance
- 14 μm/mN
Stylus
- Stylus type
- Conical
- Tracking force, range
- 1,8 - 2,2 g (mN)
- Tracking force, recommended
- 2,0 g (mN)
- Tracking angle
- 23°
Connectivity
- Mounting standard
- 1/2 inch
- Recommended load resistance
- 47 kΩ
Physical
- Height stylus tip to top mounting surface
- 18,2 mm
- Cartridge weight
- 5,5 g
- Body material
- Resonance optimized ABS
- Generator magnet
- Miniature neodymium