Amp Box S3
Compact stereo power amplifier with a single RCA line input and 23 W per channel into 8 ohms. Suited to small rooms, desktop nearfield monitors, streamer or multiroom setups, and in-wall or ceiling speakers.
- 2 x 23 W at 8 ohms, 40 W at 4 ohms
- One pair of RCA line inputs
- Metal casing, 103 x 36 x 118 mm, 385 g
- 12 V trigger in and out on 2.5 mm jack
- THD below 0.02% at 10 W / 4 ohms
- Designed and made in Europe
Fotografije
8Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal Amp Box S3, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The Amp Box S3 is a micro-sized stereo power amplifier in a metal casing that shields against vibration and interference. It has one pair of RCA inputs and drives passive loudspeakers, delivering 2 x 23 W into 8 ohms and 40 W into 4 ohms, with a 2 x 50 W peak figure at 4 ohms. It is built around a redesigned PCB and amplifier topology aimed at lower distortion and a better signal-to-noise ratio.
Suggested uses include a hi-fi amplifier for rooms of 10-15 m2, a desktop amp for nearfield monitors, a power-amp upgrade for a streamer or home cinema system, a multiroom amplifier, and an amp for in-wall or ceiling speakers. The case measures 103 x 36 x 118 mm and weighs 385 g without the power supply.
Speaker connections accept 4 mm banana plugs, spades, pins or bare wire. A 2.5 mm jack provides a 12 V DC trigger input and output for switching with other equipment. Power comes from an external 20 V / 3 A universal DC supply. The amp is designed and produced in Europe and comes in a black and silver finish.
Video
Specifikacije
- Znamka
- Pro-Ject
- Model
- Amp Box S3
- Kategorija
- Hi-Fi in domači avdio › Ojačevalniki
Audio
- Power output
- 2 x 23 W / 40 W at 8 ohms / 4 ohms
- Peak power
- 2 x 50 W at 4 ohms
- Frequency response
- 20Hz - 20kHz (- 0,7dB / 4 ohms)
- Channel separation
- > -68 dB @ 20kHz
- Signal-to-noise ratio
- 87dBV (100dBV-'A' weighted)/4ohms
- THD
- < 0,02% @ 10W / 4 ohms
- Gain
- 31 dB
Inputs
- Input
- 1 pair RCA sockets
- Input impedance
- 25 kohm
Outputs
- Speaker sockets
- 4mm Ø Banana, spades. pins or bare wire
Connectivity
- Trigger 12V DC
- In&Out, 2-pole jack socket Ø 2,5mm
Power
- Power supply
- 20V/3A DC (universal power supply)
Physical
- Dimensions W x H x D
- 103 x 36 x 118mm
- Weight
- 385g without power supply
- Finish
- Black & silver
- Casing
- Metal