wafer1
Compact on-wall loudspeaker from PMC's wafer range, a two-way design with a 140mm bass driver and twin 27mm soft dome tweeters. It suits discreet home cinema or stereo installs and some professional post-production rooms.
- Compact two-way on-wall loudspeaker
- 140mm LF driver with 2 x 27mm soft dome HF
- ATL bass loading in a small cabinet
- Frequency response 50Hz-25kHz, 87dB sensitivity
- 4mm speaker sockets, 8 ohm impedance
- 20 year warranty if registered within 10 days
Fotók
5Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy wafer1 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The wafer1 is the smaller of the two models in the wafer series, an on-wall loudspeaker meant for installations where a low-profile look matters but sound quality should not suffer. It can sit alongside a high-resolution display for a home cinema setup or serve as a compact stereo pair.
It combines a 140mm (5.5") low-frequency driver with two 27mm soft dome high-frequency units. Bass loading uses PMC's Advanced Transmission Line (ATL) approach rather than a ported or sealed box, aimed at deeper bass from a small cabinet. The series also uses TT Technology, Stealth Baffle and H-Line ATL. Frequency response is 50Hz to 25kHz, sensitivity is 87dB (1W, 1m) and nominal impedance is 8 ohms.
Connection is by a single pair of 4mm sockets, and the recommended amplifier power is 20 to 150W. The cabinet measures 500mm high, 235mm wide and 100mm deep and weighs 5kg. The model is listed in the maker's archive. Registering a new unit within 10 days of purchase gives a 20 year warranty, subject to terms. A manual, brochure, mounting template and drawing are available for download.
Videó
Műszaki adatok
- Márka
- PMC
- Modell
- wafer1
- Kategória
- Hi-Fi és otthoni hang › Hangfalak
Audio
- Frequency response
- 50Hz-25kHz
- Sensitivity
- 87dB 1w 1m
- Impedance
- 8 Ohms
- Recommended amp power
- 20 - 150W
Drive units
- LF driver
- 140mm (5 1/2")
- HF drivers
- 2 x 27mm Soft dome
- Bass loading
- Advanced Transmission Line (ATL)
Connectivity
- Input connectors
- 1 pair 4mm sockets
Physical
- Height
- 500mm (19.7")
- Width
- 235mm (9.3")
- Depth
- 100mm (3.9")
- Weight
- 5kg (11lbs)
- Mounting
- On-wall
Technology
- Design features
- TT Technology, Stealth Baffle, H-Line ATL
Warranty
- Extended warranty
- 20 years if registered within 10 days of purchase
Downloads
- Documents
- Brochure, mounting template, manual, drawing