TLE1S
Active subwoofer with two 170mm alloy-chassis drivers loaded by a 3m Advanced Transmission Line, built to pair with PMC DB1 S, TB2 S, DB1S-A II, TB2S-AII and IB1 speakers in surround setups. It suits studios and rooms where space is limited.
- Two 170mm doped drivers in cast alloy chassis
- 3m effective Advanced Transmission Line loading
- Bryston-designed 150W RMS amplifier
- Frequency response 22Hz-200Hz
- Variable roll-off 40Hz-155Hz at 12dB/octave
- 2 x XLR and 2 x RCA phono inputs
Myndir
5Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur TLE1S birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The TLE1S is a powered subwoofer from PMC's archive range. Two custom 170mm doped drivers sit at the mouth of a transmission line with an effective length of 3m, a design the maker describes as giving deeper bass from a smaller cabinet. The built-in amplifier and crossover section was designed by Bryston and delivers 150W RMS.
The frequency response runs from 22Hz to 200Hz, and the roll-off frequency is adjustable between 40Hz and 155Hz at 12dB per octave. The cabinet has a small footprint and a set of user controls, which makes placement easier in rooms where space is tight. It was designed as the low-frequency partner for the DB1 S, TB2 S, DB1S-A II, TB2S-AII and IB1 monitors in a surround configuration.
Signal connects through two balanced XLR inputs or two RCA phono inputs, each with 20k ohm input impedance. A brochure, manual and technical drawing are available as downloads. Registering the product within 10 days of purchase extends the warranty to 20 years, subject to terms.
Tækniupplýsingar
- Framleiðandi
- PMC
- Líkan
- TLE1S
- Flokkur
- Hljóðver › Stúdíóhátalarar
Audio
- Frequency response
- 22Hz-200Hz
- Effective ATL length
- 3m (9.8ft)
- Drive units (LF)
- 2 x doped 170mm cast alloy chassis
- Roll-off frequency
- Variable, 40Hz-155Hz @ 12dB/Oct
- Power bandwidth
- 1Hz-100kHz
- Signal to noise
- 90dB ref. 0dBu
Amplifier
- Amplifier section
- Bryston designed, 150W RMS
Inputs
- XLR inputs
- 2 x XLR, input impedance 20k Ohms
- RCA phono inputs
- 2 x RCA phono, impedance 20k Ohms
Power
- Power consumption
- 160W
Physical
- Height
- 550mm (21.6in)
- Width
- 200mm (7.80in)
- Depth
- 545mm (21.5in) + grille
- Weight
- 17.5kg (38.5lbs)
Warranty
- Extended warranty
- 20 years if registered within 10 days of purchase (T&Cs apply)