
PMC15 SUB
Active 1-way reference subwoofer built around a 15-inch driver in an Advanced Transmission Line cabinet, driven by a 2000W DSP amplifier. It is intended to extend a PMC monitoring system in professional studios.
- 1-way ATL active reference subwoofer
- Single in-house 15-inch LF driver
- 2000W from master36 DSP/amplifier
- Analogue and digital inputs, digital up to 192kHz
- Room alignment EQ via SoundAlign2 over LAN
- Cabinet weighs 87kg
Снимки
8Обяви
Още няма обяви за този модел
Когато някой продаде PMC15 SUB, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The PMC15 SUB is a standalone low-frequency subwoofer that uses the same ATL (Advanced Transmission Line) cabinet with Laminair airflow venting as the full-range PMC15, but without the tweeter and midrange drivers. Its single driver is an in-house 15-inch unit with double-stacked magnets, a three-inch three-layer voice coil and a stable suspension, designed to keep motor force linear over a long excursion.
Power and control come from a rack-mountable master36 DSP/amplifier unit that supplies 2000W of Class-D amplification to the driver. The DSP includes high- and low-pass filters tuned to this driver, excursion limiting for protection and room-optimisation EQ.
The system takes analogue and digital inputs, with digital up to 192kHz. It is set up over a standard LAN connection through the browser-based SoundAlign2 interface. The cabinet can be used in vertical or horizontal system variants.
Спецификации
- Марка
- PMC
- Модел
- PMC15 SUB
- Категория
- Студио › Студийни монитори
Audio
- Type
- 1-way, ATL™ active reference subwoofer
- Drive unit complement
- LF 15 inch
- Effective ATL™ length
- 4m (13.1ft)
- Room alignment
- Full DSP Room Alignment EQ facilities with SoundAlign2
- DSP functions
- High and low-pass filters, excursion limiting, room-optimisation EQ
Inputs
- Input types
- Analogue & digital
- Digital input sample rate
- Up to 192kHz
Power
- Electronics (per channel)
- 1 x PMC master36 DSP/Power amplifier
- Power per cabinet
- 2000W (LF 2000W)
- Amplifier power per channel
- LF 2000W
- Amplifier class
- Class-D
Connectivity
- Control interface
- SoundAlign2 browser-based interface over standard LAN
- Wired Ethernet access
- Any standard web browser on PC or Mac
Physical
- Cabinet height
- 1040mm
- Cabinet width
- 432mm
- Cabinet depth
- 790mm (+20mm LF driver surround)
- Weight per unit
- 87kg
- System variants
- Vertical, Horizontal