MB2S XBD
Passive three-way studio monitor with two 12-inch Radial bass drivers, a 75mm mid-range dome and a 27mm soft-dome tweeter. It is a higher-headroom version of the MB2S, aimed at stereo or surround music recording, mastering and post production in larger rooms.
- Passive 3-way monitor with two 310mm Radial bass drivers
- Extra 3dB LF headroom below 380Hz versus the MB2S
- ATL bass loading, effective length 2 x 3m
- 32-element 4th-order crossover in external enclosures
- Tri-wire or tri-amp via 3 pairs of 4mm sockets
- 20 year warranty if registered within 10 days of purchase
Billeder
7Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en MB2S XBD, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The MB2S XBD builds on the MB2S by adding an extra bass cabinet with a second 310mm Radial driver. This raises low-frequency headroom by 3dB below 380Hz, so a larger room can be driven well. In a surround setup, the extra headroom lets the speakers handle the .1 effects channel without separate subwoofers.
Each monitor is a three-way design using Advanced Transmission Line (ATL) bass loading, with an effective ATL length of 2 x 3m. The 4th-order passive crossover has 32 elements and sits in external enclosures. These can be mounted on the back of the XBD cabinets. Crossover points are 380Hz and 3.8kHz, and the recommended amplifier power is 250-900W.
Connection is by three pairs of 4mm sockets, allowing tri-wire or tri-amp operation. Suggested amplifier power per channel is 120W for the HF, 120W for the MF and 600W for each of the two LF drivers. The cabinet is large and heavy, at 1740mm high and 88kg.
Specifikationer
- Mærke
- PMC
- Model
- MB2S XBD
- Kategori
- Studie › Studiemonitorer
Audio
- Frequency response
- 20Hz - 25kHz
- Sensitivity
- 91dB 1W 1m
- Impedance
- 4 Ohm nominal
- Effective ATL length
- 2 x 3m (10ft)
- Crossover frequencies
- 380Hz & 3.8kHz
- Crossover
- 32 element, 4th order passive, external enclosures
Drive units
- LF
- 2 x 310mm PMC Radial driver
- MF
- 75mm PMC fabric dome
- HF
- 27mm PMC fabric soft dome
Inputs
- Input connectors
- 3 pairs 4mm sockets (tri-wire or tri-amp)
Power
- Recommended amp power
- 250-900W
- Amplifier power per channel: HF
- 120W
- Amplifier power per channel: MF
- 120W
- Amplifier power per channel: LF (each of 2)
- 600W
Physical
- Height
- 1740mm (68.50")
- Width
- 380mm (14.96")
- Depth
- 535mm (21.06")
- Weight
- 88kg (193.6lbs)
Warranty
- Extended warranty
- 20 years if registered within 10 days of purchase