SPU GTX E
A moving coil phono cartridge from Ortofon's SPU series with a built-in step-up transformer and an elliptical diamond stylus. It suits vinyl listeners who want the classic SPU sound connected directly to a standard phono input.
- Moving coil cartridge with built-in step-up transformer
- Elliptical stylus, tip radius r/R 8/18 μm
- 4 mV output at 1 kHz, 5 cm/s
- Recommended tracking force 4 g
- Bayonet/SME mount, 38 g
- Hand-built in Denmark
Fotografije
6Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal SPU GTX E, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The SPU GTX E pairs the tonal character of the long-running SPU line with a glass-fiber reinforced co-polymer unibody housing. It is hand-built in Denmark. The bottom cover is moulded from the same material, so the generator sits in a uniform, rigid, low-resonance enclosure.
The stylus is elliptical, with a narrower front radius and a broader side radius. This gives more contact with the groove walls and is intended to improve tracking and detail. The GTX E shares its construction with the spherical-stylus GTX S and differs mainly in the diamond.
A step-up transformer, developed with Lundahl Transformers, is built into the body. The cartridge therefore has a 4 mV output and connects to a standard phono stage or amplifier input like a moving magnet cartridge, without a separate step-up device or head amp. It mounts with a bayonet/SME fitting.
Specifikacije
- Znamka
- Ortofon
- Model
- SPU GTX E
- Kategorija
- DJ oprema › Gramofonske glave in igle
Electrical
- Output voltage at 1 kHz, 5 cm/s
- 4 mV
- Internal impedance, DC resistance
- 610 Ω
- Recommended load impedance
- 47 kΩ
- Recommended load capacitance
- 150 – 600 pF
- Built-in step-up transformer
- Yes
Audio
- Frequency response 20 Hz - 20 kHz
- ±3 dB
- Channel separation at 1 kHz
- 20 dB
- Channel balance at 1 kHz
- 1.5 dB
- Tracking ability at 315 Hz
- 60 μm
- Compliance, dynamic, lateral
- 10 μm/mN
Stylus and Tracking
- Stylus type
- Elliptical
- Stylus tip radius
- r/R 8/18 μm
- Recommended tracking force
- 4 g
- Tracking angle
- 20°
Construction
- Coil system
- OFC Coil wire
- Coil wire material
- OFC
- Cartridge body material
- Glass-fiber reinforced co-polymer
- Mounting type
- Bayonet/SME
Physical
- Cartridge weight
- 38 g
- Cartridge colour
- Black