
MC X50
Moving-coil phono cartridge and the top model of Ortofon's MC X Series, with a nude Micro Ridge diamond stylus on a boron cantilever. Aimed at vinyl listeners who want a high-resolution MC cartridge with a half-inch mount.
- Top model of the Ortofon MC X Series
- Nude Micro Ridge diamond stylus, r/R 2.5/75 μm
- Boron cantilever
- High-purity silver coil wire
- MIM stainless steel body with honeycomb core
- 0.4 mV output, 2.0 g tracking force, 8.6 g weight
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať MC X50, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The MC X50 is the highest-ranked cartridge in the MC X Series. It pairs a nude Micro Ridge diamond stylus, which has a very narrow side radius, with a boron cantilever. This combination is intended to improve high-frequency tracking, lower inner-groove distortion, and give a quick transient response with low distortion.
Inside, the coils are wound with high-purity silver wire and work with a newly developed magnet system that has a one-piece pole cylinder built into a rear magnet yoke. The damping uses rubber compounds developed and produced in-house, and the X50 gets a new rubber suspension with a newly formulated compound made specifically for it. The body is MIM stainless steel with a honeycomb core structure, finished in black.
The cartridge uses a half-inch mount and weighs 8.6 g. Recommended tracking force is 2.0 g, and output voltage is 0.4 mV at 1 kHz, so it needs a phono stage with moving-coil input.
Video
Parametre
- Značka
- Ortofon
- Model
- MC X50
- Kategória
- DJ vybavenie › Prenosky a ihly
Electrical
- Output voltage at 1 kHz, 5 cm/sec
- 0.4 mV
- Channel balance at 1 kHz
- 0.5 dB
- Channel separation at 1 kHz
- > 28 dB
- Internal impedance, DC resistance
- 6 Ω
- Frequency response 20 Hz - 20 kHz
- +/-1 dB
Stylus and Cantilever
- Stylus type
- Nude Micro Ridge diamond
- Stylus tip radius
- r/R 2.5/75 μm
- Cantilever material
- Boron
- Stylus suspensions
- Ortofon exclusive
- Compliance, dynamic, lateral
- 14 μm/mN
Coil System
- Coil system
- High-purity silver Coil wire
- Coil wire material
- High-purity silver
Setup
- Tracking force, recommended
- 2.0 grams
- Mounting type
- Half inch mount
Physical
- Cartridge body material
- MIM Stainless Steel & Honeycomb Core Structure
- Cartridge colour
- Black
- Cartridge weight
- 8.6 grams