
MC Verismo
A top-tier moving-coil phono cartridge in Ortofon's Exclusives series, built around a Replicant 100 nude diamond stylus, a diamond cantilever and a laser-melted titanium body. It is aimed at owners of high-end turntables and tonearms who want a very detailed, tonally neutral reproduction.
- Moving-coil cartridge from the Ortofon Exclusives series
- Nude Replicant 100 diamond stylus on a solid diamond cantilever
- SLM titanium body with three contact points to the tonearm
- Aucurum coil wire: gold-plated 6NX oxygen-free copper
- Output 0.2 mV; tracking force 2.5–2.8 g, recommended 2.6 g
- Half inch mount, weight 9.5 g
Fotók
6Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy MC Verismo modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The MC Verismo is a moving-coil cartridge that sits at the top of Ortofon's Exclusives range. Its stylus is a nude Replicant 100 diamond, a line-contact shape designed to follow the original cutting stylus closely, mounted on a solid diamond cantilever. The coils use Aucurum wire, gold-plated 6NX oxygen-free copper, and sit in a compact neodymium magnet system with an armature made from a metal alloy that is less magnetic than ordinary iron.
The body is made of titanium using selective laser melting, a layer-by-layer process that allows control over material density and gives high internal damping. The cartridge touches the tonearm at three defined contact points on its top side, which is meant to give a consistent mechanical coupling.
The cartridge has a half-inch mount, weighs 9.5 g and has moderate compliance, so it suits most modern tonearms. Output is 0.2 mV, with a recommended tracking force of 2.6 g and a recommended load impedance above 10 Ω.
Videó
Műszaki adatok
- Márka
- Ortofon
- Modell
- MC Verismo
- Kategória
- DJ-felszerelés › Hangszedők és tűk
Electrical
- Output voltage at 1 kHz, 5 cm/sec
- 0.2 mV
- Channel balance at 1 kHz
- 0.5 dB
- Channel separation at 1 kHz
- > 25 dB
- Internal impedance, DC resistance
- 7 Ω
- Recommended load impedance
- >10 Ω
Audio
- Frequency response 20 Hz - 20 kHz
- +2 dB/-1 dB
- Tracking ability at 315 Hz
- 80 μm
- Compliance, dynamic, lateral
- 13 μm/mN
Stylus and cantilever
- Stylus type
- Nude Ortofon Replicant 100 Diamond
- Stylus tip radius
- r/R 5/100 μm
- Cantilever material
- Diamond
Coil
- Coil system
- Aucurum Coil Wire
- Coil wire material
- Aucurum Coil Wire
Setup
- Tracking force range
- 2.5 – 2.8 g (25-28 mN)
- Tracking force, recommended
- 2.6 g (26mN)
- Tracking angle
- 23°
- Mounting type
- Half inch mount
Physical
- Cartridge body material
- SLM Titanium
- Cartridge colour
- Silver
- Cartridge weight
- 9.5 g