MC Verismo
Ortofon Спрян от продажба

MC Verismo

A top-tier moving-coil phono cartridge in Ortofon's Exclusives series, built around a Replicant 100 nude diamond stylus, a diamond cantilever and a laser-melted titanium body. It is aimed at owners of high-end turntables and tonearms who want a very detailed, tonally neutral reproduction.

  • Moving-coil cartridge from the Ortofon Exclusives series
  • Nude Replicant 100 diamond stylus on a solid diamond cantilever
  • SLM titanium body with three contact points to the tonearm
  • Aucurum coil wire: gold-plated 6NX oxygen-free copper
  • Output 0.2 mV; tracking force 2.5–2.8 g, recommended 2.6 g
  • Half inch mount, weight 9.5 g

Снимки

6

Обяви

Още няма обяви за този модел

Когато някой продаде MC Verismo, обявите и историята на продажбите ще се показват тук.

Продай такъв

Описание

The MC Verismo is a moving-coil cartridge that sits at the top of Ortofon's Exclusives range. Its stylus is a nude Replicant 100 diamond, a line-contact shape designed to follow the original cutting stylus closely, mounted on a solid diamond cantilever. The coils use Aucurum wire, gold-plated 6NX oxygen-free copper, and sit in a compact neodymium magnet system with an armature made from a metal alloy that is less magnetic than ordinary iron.

The body is made of titanium using selective laser melting, a layer-by-layer process that allows control over material density and gives high internal damping. The cartridge touches the tonearm at three defined contact points on its top side, which is meant to give a consistent mechanical coupling.

The cartridge has a half-inch mount, weighs 9.5 g and has moderate compliance, so it suits most modern tonearms. Output is 0.2 mV, with a recommended tracking force of 2.6 g and a recommended load impedance above 10 Ω.

Видео

Спецификации

Марка
Ortofon
Модел
MC Verismo
Категория
DJ техника › Игли и глави за грамофон

Electrical

Output voltage at 1 kHz, 5 cm/sec
0.2 mV
Channel balance at 1 kHz
0.5 dB
Channel separation at 1 kHz
> 25 dB
Internal impedance, DC resistance
7 Ω
Recommended load impedance
>10 Ω

Audio

Frequency response 20 Hz - 20 kHz
+2 dB/-1 dB
Tracking ability at 315 Hz
80 μm
Compliance, dynamic, lateral
13 μm/mN

Stylus and cantilever

Stylus type
Nude Ortofon Replicant 100 Diamond
Stylus tip radius
r/R 5/100 μm
Cantilever material
Diamond

Coil

Coil system
Aucurum Coil Wire
Coil wire material
Aucurum Coil Wire

Setup

Tracking force range
2.5 – 2.8 g (25-28 mN)
Tracking force, recommended
2.6 g (26mN)
Tracking angle
23°
Mounting type
Half inch mount

Physical

Cartridge body material
SLM Titanium
Cartridge colour
Silver
Cartridge weight
9.5 g

Документи

PDF РъководствоPDF · от производителя

Данни: ortofon.com; снимки: Ortofon product page · обновено 2026-10-09 · Откри грешка? Пиши ни