MC Quintet Red
Ortofon Udgået

MC Quintet Red

Entry-level moving coil phono cartridge with an elliptical diamond stylus and a red PC body, aimed at listeners moving up to MC for the first time. It is described as an all-rounder with open, dynamic sound and a slight warmth.

  • Moving coil cartridge with elliptical stylus, r/R 8/18 µm
  • Output voltage 0.5 mV at 1 kHz, 5 cm/sec
  • Recommended tracking force 2.3 g (range 2.1-2.5 g)
  • Low 7 Ohm internal impedance suits many preamps and transformers
  • Light 9 g PC body with neodymium magnets
  • Stereoplay Goldenes Ohr 2020, MC cartridge category

Billeder

5

Annoncer

Ingen annoncer for denne model endnu

Når nogen sælger en MC Quintet Red, vises annoncerne og salgshistorikken her.

Sælg sådan en

Beskrivelse

The MC Quintet Red is the entry model of Ortofon's Quintet moving coil series. It carries an elliptical stylus with an r/R 8/18 µm tip and a 0.5 mV output at 1 kHz, 5 cm/sec. The tonearm is asked to track it at 2.1-2.5 g, with 2.3 g recommended.

The body is moulded from PC thermoplastic, a light, impact-resistant material with a scratch-resistant surface. Neodymium magnets are used to get a good output level, and the low internal impedance of 7 Ohm makes the cartridge less sensitive to load, so it suits a wide range of preamps and step-up transformers. The sound is characterised as open and dynamic with a slight touch of warmth.

Mounting is a top-mount, half-inch design. The aluminium frame has threaded holes and takes 5 mm or 7 mm screws, depending on the thickness of the headshell. Square lines, a visible stylus and generous clearance beneath the body are meant to make alignment easier. The cartridge won the Goldenes Ohr award 2020 from Stereoplay readers in the MC phono cartridge category.

Video

Specifikationer

Mærke
Ortofon
Model
MC Quintet Red
Kategori
DJ-udstyr › Pickupper og nåle

Electrical

Output voltage at 1 kHz, 5cm/sec
0.5 mV
Channel balance at 1 kHz
< 1.5 dB
Channel separation at 1 kHz
> 21 dB
Internal impedance, DC resistance
7 Ohm
Recommended load impedance
> 20 Ohm

Audio

Frequency response 20 Hz - 20 kHz
+/- 2.5 dB
Tracking ability at 315 Hz
65 µm
Compliance, dynamic, lateral
15 µm/mN

Stylus

Stylus type
Elliptical
Stylus tip radius
r/R 8/18 µm

Tracking

Tracking force range
2.1-2.5 g
Tracking force, recommended
2.3 g
Tracking angle
20°

Physical

Cartridge body material
PC
Cartridge colour
Red
Cartridge weight
9 g
Mounting type
Half inch mount

Data: ortofon.com; fotos: Ortofon product page · opdateret 2026-10-09 · Fundet en fejl? Skriv til os