MC 90X
A moving-coil phono cartridge with a stainless-steel SLM body, Replicant 100 diamond on a boron cantilever and a neodymium magnet system with a field stabilizing element. It is a reworking of the earlier MC A90 for vinyl listeners who want a high-end MC.
- Stainless-steel body made by Selective Laser Melting
- Replicant 100 diamond stylus, r/R 5/100 μm, on a boron cantilever
- Neodymium magnet with Field Stabilizing Element
- Wide Range Damping with a platinum disc and in-house rubber
- Output 0.25 mV, tracking force 2.3 g
- Half-inch mount, weight 9.5 g
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať MC 90X, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The MC 90X is a low-output moving-coil cartridge built around a body made by Selective Laser Melting from stainless steel. The material adds rigidity and brings the cartridge to 9.5 grams, which suits a wider range of turntables and tonearms.
The stylus is an Ortofon Replicant 100 diamond with a 5/100 μm tip radius, mounted on a boron cantilever. Coils are wound with Aucurum wire. The magnet system uses a compact neodymium magnet together with a Field Stabilizing Element, a small conductive cylinder that keeps the magnetic field steady as the armature moves and is intended to improve channel separation and reduce dynamic distortion.
Damping is handled by the Wide Range Damping system, a platinum disc between two rubber absorbers of different properties. The rubber compounds are developed and made by Ortofon in-house. The cartridge uses a half-inch mount and is rated for 2.3 g tracking force with a 0.25 mV output.
Video
Parametre
- Značka
- Ortofon
- Model
- MC 90X
- Kategória
- DJ vybavenie › Prenosky a ihly
Electrical
- Output voltage at 1 kHz, 5cm/sec
- 0.25 mV
- Internal impedance, DC resistance
- 4 Ω
- Recommended load resistance
- > 10 Ω
- Coil system
- Aucurum Coil Wire
- Coil wire material
- Aucurum Coil Wire
Audio
- Frequency response 20 Hz - 20 kHz
- +/- 1 dB
- Channel separation at 1 kHz
- > 28 dB
- Channel balance at 1 kHz
- < 0.2 dB
- Compliance, dynamic, lateral
- 11 μm/mN
Stylus
- Stylus type
- Ortofon Replicant 100 Diamond
- Stylus tip radius
- r/R 5/100 μm
- Cantilever material
- Boron
- Tracking force, recommended
- 2.3 grams
Physical
- Cartridge body material
- SLM Stainless Steel
- Cartridge weight
- 9.5 grams
- Mounting type
- Half inch mount