2MR Black LVB 250
Moving-magnet phono cartridge with a nude Shibata stylus on a boron cantilever and a Nano Tube suspension. Its narrow housing suits low-profile tonearms such as Rega, for listeners upgrading from the 2M Black.
- Nude Shibata diamond stylus on a boron cantilever
- Nano Tube suspension based on carbon nanotube filler
- Quad-coil system with silver-plated OFC wire
- Narrow housing for low-profile tonearms such as Rega
- 5 mV output, 47 kOhm recommended load
- Recommended tracking force 1.6 g
Fotos
5Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um 2MR Black LVB 250, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The 2MR Black LVB 250 builds on the 2M Black moving-magnet design. It swaps in a boron cantilever, which is stiff and light, and a nude Shibata diamond stylus with a slim, highly polished profile that contacts a wide area of the groove wall.
The suspension uses a Nano Tube rubber compound filled with multi-wall carbon nanotubes, intended to damp better and improve overall performance. The coil system is a quad-coil layout with split pole pins and silver-plated OFC wire.
The body is cut narrow for low-form-factor tonearms such as those on Rega turntables. It mounts with two screws on a half-inch mount and needs no spacers or modifications under the tonearm. A replacement stylus (Stylus 2M Black LVB 250) is listed.
Vídeo
Especificações
- Marca
- Ortofon
- Modelo
- 2MR Black LVB 250
- Categoria
- Equipamento DJ › Cápsulas e agulhas
Stylus and cantilever
- Stylus type
- Nude Shibata diamond
- Stylus tip radius
- r/R 6/50 µm
- Cantilever material
- Boron
- Stylus colour
- Black
- Replacement stylus
- Stylus 2M Black LVB 250
Electrical
- Output voltage at 1 kHz, 5cm/sec
- 5 mV
- Channel separation at 1 kHz
- > 27 dB
- Channel balance at 1 kHz
- < 1 dB
- Frequency response 20 Hz - 20 kHz
- + 2 / - 1 dB
- Internal impedance, DC resistance
- 1.2 kOhm
- Internal inductance
- 630 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 47 kOhm
Coil system
- Coil system
- Quad-coils with split pole pins and silver-plated OFC Coil Wire
- Coil wire material
- Silver-plated OFC Coil Wire
Tracking
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 22 µm/mN
- Tracking force range
- 1.5-1.7 g (15-17 mN)
- Tracking force, recommended
- 1.6 g (16 mN)
- Tracking angle
- 20°
Physical
- Cartridge weight
- 6 g
- Cartridge colour
- Black
- Mounting type
- Half inch mount