2MR 78
Ortofon Descontinuado

2MR 78

Mono moving-magnet cartridge made for playing 78 rpm shellac records, with a spherical diamond stylus and a narrow body for low-profile tonearms such as Rega. Suited to listeners with 78 rpm collections who want true mono playback on a stereo system.

  • Mono cartridge for 78 rpm shellac records
  • Spherical diamond stylus, 65 µm tip radius
  • Strapped output gives true mono on any stereo system
  • Narrow low-form housing suits Rega-type tonearms
  • Half inch mount, two-screw fitting, no spacers
  • Replacement stylus: Stylus 2M 78

Fotos

5

Anúncios

Ainda não há anúncios deste modelo

Quando alguém vender um 2MR 78, os anúncios e o histórico de vendas aparecem aqui.

Vender um igual

Descrição

The 2MR 78 is a mono cartridge built around the larger stylus profile that 78 rpm shellac records require. It carries a spherical diamond tip with a 65 µm radius on an aluminium cantilever, and is tuned for a tracking force of 1.6-2.0 g.

Its motor uses quad coils with split pole pins, and the output is strapped so both sets of pole pins deliver the same signal. This gives true mono reproduction through any stereo playback chain, without separate mono-specific equipment.

The housing is narrow and low in form factor, matching the requirements of turntables and tonearms such as Rega. It mounts with two screws on a half inch mount, with no modifications or spacers under the tonearm. A replacement stylus, the Stylus 2M 78, is available, and a user guide and dimensions chart can be downloaded.

Especificações

Marca
Ortofon
Modelo
2MR 78
Categoria
Equipamento DJ › Cápsulas e agulhas

Audio

Output voltage at 1 kHz, 5cm/sec
4 mV
Frequency response 20 Hz - 20 kHz
3 / - 1 dB
Tracking ability at 315 Hz
70 µm
Compliance, dynamic, lateral
18 µm/mN

Stylus

Stylus type
Spherical diamond
Stylus tip radius
R 65 µm
Cantilever material
Aluminium
Stylus colour
Grey
Replacement stylus
Stylus 2M 78

Tracking

Tracking force range
1.6-2.0g (16-20 mN)
Tracking force, recommended
1.8 g (18 mN)
Tracking angle
20°

Electrical

Internal impedance, DC resistance
700 Ohm
Internal inductance
350 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
150-300 pF

Physical

Cartridge colour
Black/Grey
Mounting type
Half inch mount

Dados: ortofon.com; fotografias: Ortofon product page · atualizado em 2026-10-09 · Encontraste um erro? Escreve-nos