2M Red
Entry-level moving-magnet phono cartridge from the Ortofon 2M series, with an elliptical diamond stylus and aluminium cantilever. Aimed at vinyl listeners who want an open, dynamic sound with a touch of warmth on a common half-inch-mount turntable.
- Moving-magnet cartridge, entry model of the 2M series
- Elliptical diamond stylus, r/R 8/18 µm
- Aluminium cantilever
- Output 5.5 mV at 1 kHz
- Recommended tracking force 1.8 g
- Designed and made in Denmark
Bilder
5Annonser
Ingen annonser for denne modellen ennå
Når noen selger en 2M Red, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The 2M Red is the starting point of Ortofon's 2M moving-magnet range. It uses an elliptical diamond stylus on an aluminium cantilever and a quad-coil generator with split pole pins and OFC coil wire. Output is 5.5 mV at 1 kHz, and the recommended tracking force is 1.8 g.
The body is polymer and aluminium in black and red, and it weighs 7.2 g. The 2M series was styled with Møller Jensen Design and is designed and made in Denmark. It mounts on half-inch fixings, which suits most common turntables.
The wider 2M family comes in several configurations: the standard 2M, the Premounted for S-shaped tonearms, the Verso for bottom-mount headshells, and the 2MR for low-profile Rega-type tonearms. For loading, the recommended values are 47 kOhm resistance and 150-300 pF capacitance, which is the usual setup for a moving-magnet input.
Video
Spesifikasjoner
- Merke
- Ortofon
- Modell
- 2M Red
- Kategori
- DJ-utstyr › Pickuper og nåler
Electrical
- Output voltage at 1 kHz, 5cm/sec
- 5.5 mV
- Channel balance at 1 kHz
- 1.5 dB
- Channel separation at 1 kHz
- 22 dB
- Frequency response 20 Hz - 20 kHz
- + 3 / - 1 dB
- Internal impedance, DC resistance
- 1.3 kOhm
- Internal inductance
- 700 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Stylus and Generator
- Stylus type
- Elliptical diamond
- Stylus tip radius
- r/R 8/18 µm
- Cantilever material
- Aluminium
- Coil system
- Quad-coils with split pole pins and OFC Coil wire
- Coil wire material
- OFC Wire
Tracking
- Tracking ability at 315 Hz
- 70 µm
- Compliance, dynamic, lateral
- 20 µm/mN
- Tracking force range
- 1.6-2.0 g (16-20 mN)
- Tracking force, recommended
- 1.8 g (18 mN)
- Tracking angle
- 20°
Physical
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/Red
- Cartridge weight
- 7.2 g
- Mounting type
- Half inch mount