2M Mono
Mono phono cartridge for playing mono microgroove LP records on any stereo system. It has a nude spherical 18 µm stylus and a strapped output, so it suits listeners with mono-era vinyl.
- Nude spherical stylus, R 18 µm tip radius
- Strapped output works with any stereo system
- Output voltage 4 mV at 1 kHz, 5 cm/sec
- Recommended tracking force 1.8 g (18 mN)
- Aluminium cantilever, polymer and aluminium body
- Standard, Premounted and Verso configurations
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao 2M Mono, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The 2M Mono is a moving-magnet cartridge made for mono microgroove LPs. Its stylus is a nude spherical diamond with an 18 µm tip radius, a size chosen to sit correctly in the wider grooves of mono-era pressings. The body is polymer and aluminium, with an aluminium cantilever.
The output is strapped, so both sets of pole pins carry the same signal. This lets the cartridge be used with an ordinary stereo phono stage and playback chain, with no mono-specific equipment needed. Because it reads the groove in a single plane, it is intended to cut the surface noise a stereo cartridge picks up from mono records.
The cartridge belongs to the 2M Series, which is sized to fit most common turntables. It comes in three configurations: standard, Premounted for S-shaped tonearms, and Verso for bottom-mount headshells. The recommended tracking force is 1.8 g, with a load of 47 kOhm and 150-300 pF.
Videozapis
Specifikacije
- Marka
- Ortofon
- Model
- 2M Mono
- Kategorija
- DJ oprema › Gramofonske glave i igle
Audio
- Output voltage at 1 kHz, 5 cm/sec
- 4 mV
- Frequency response 20 Hz - 20 kHz
- 3 / - 1 dB
- Tracking ability at 315 Hz
- 70 µm
- Compliance, dynamic, lateral
- 18 µm/mN
Stylus
- Stylus type
- Nude Spherical
- Stylus tip radius
- R18 µm
- Cantilever material
- Aluminium
Setup
- Tracking force range
- 1.6-2.0 g (16-20 mN)
- Tracking force, recommended
- 1.8 g (18 mN)
- Tracking angle
- 20°
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Electrical
- Internal impedance, DC resistance
- 700 Ohm
- Internal inductance
- 350 mH
Physical
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/White
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g
- Mounting types
- Half inch mount