2M Mono Verso
Ortofon Udgået

2M Mono Verso

A mono phono cartridge for playing mono microgroove LP records, built for bottom-mount headshells. It carries a nude spherical diamond stylus and suits vinyl listeners with mono pressings.

  • Mono cartridge for mono microgroove LP records
  • Bottom-mount (Verso) configuration for headshells
  • Nude spherical stylus, R18 µm, aluminium cantilever
  • Strapped output works with any stereo phono stage
  • 4 mV output at 1 kHz, 5 cm/s
  • Tracking force 1.6-2.0 g, 1.8 g recommended

Billeder

5

Annoncer

Ingen annoncer for denne model endnu

Når nogen sælger en 2M Mono Verso, vises annoncerne og salgshistorikken her.

Sælg sådan en

Beskrivelse

The 2M Mono Verso is a moving magnet cartridge intended for mono microgroove LP records. This Verso version is configured for bottom-mount headshells, for turntables where the cartridge is fixed from underneath the headshell rather than on top.

It uses a nude spherical diamond stylus with an 18 µm tip radius on an aluminium cantilever. The strapped output sends the same signal from both sets of pole pins, so it can be used with a stereo phono stage and does not need mono-specific equipment. Output is 4 mV at 1 kHz, with a recommended tracking force of 1.8 g.

The body is made of polymer and aluminium in black and white. The cartridge weighs 7.2 g, and 16.7 g when premounted. Electrical loading is recommended at 47 kOhm and 150-300 pF. A replacement guide for the M2.0 mm top-plate screws is provided for the Verso mounting.

Specifikationer

Mærke
Ortofon
Model
2M Mono Verso
Kategori
DJ-udstyr › Pickupper og nåle

Electrical

Output voltage at 1 kHz, 5 cm/sec
4 mV
Frequency response 20 Hz - 20 kHz
3 / - 1 dB
Internal impedance, DC resistance
700 Ohm
Internal inductance
350 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
150-300 pF

Stylus

Stylus type
Nude Spherical
Stylus tip radius
R18 µm
Cantilever material
Aluminium

Tracking

Tracking ability at 315 Hz
70 µm
Compliance, dynamic, lateral
18 µm/mN
Tracking force range
1.6-2.0 g (16-20 mN)
Tracking force, recommended
1.8 g (18 mN)
Tracking angle
20°

Physical

Cartridge body material
Polymer and aluminum
Cartridge colour
Black/White
Cartridge weight
7.2 g
Premounted cartridge weight
16.7 g
Mounting type
Half inch bottom mount

Dokumenter

PDF BrugsanvisningPDF · fra producenten

Data: ortofon.com; fotos: Ortofon product page · opdateret 2026-10-09 · Fundet en fejl? Skriv til os