2M Blue Verso
The 2M Blue Verso is a moving-magnet phono cartridge with a nude elliptical stylus, built for bottom-mount headshells. It suits vinyl listeners who want more detail than the 2M Red from a turntable that mounts the cartridge from underneath.
- Bottom-mount (half inch) cartridge for headshells that mount from underneath
- Nude elliptical diamond stylus, r/R 8/18 µm, on aluminium cantilever
- Quad coils with split pole pins and OFC coil wire
- Output 5.5 mV at 1 kHz, 5 cm/sec
- Tracking force 1.6-2.0 g, recommended 1.8 g
- Recommended load 47 kOhm, 150-300 pF
Grianghraif
5Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine 2M Blue Verso, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The 2M Blue Verso is the bottom-mount version of Ortofon's 2M Blue. It has a nude elliptical diamond stylus on an aluminium cantilever, and a body made of polymer and aluminium. It is intended for turntables whose headshells take the cartridge from below, using a half-inch mount.
The generator uses quad coils with split pole pins and OFC coil wire. Split pole pins are an Ortofon design meant to give a moving-magnet cartridge a flatter frequency response, closer to that of a moving-coil type. Output is 5.5 mV, and the manufacturer positions the sound as more dynamic, open and detailed than the 2M Red.
Recommended tracking force is 1.8 g within a 1.6-2.0 g range. The cartridge loads at 47 kOhm with 150-300 pF of capacitance, which is the usual range for a moving-magnet phono input. A replacement guide covers swapping the screws on the Verso top plate with a Torx 8 key, and a user guide is available for download.
Físeán
Sonraíochtaí
- Branda
- Ortofon
- Samhail
- 2M Blue Verso
- Catagóir
- Trealamh DJ › Cartúis agus stílí
Audio
- Output voltage at 1 kHz, 5 cm/sec
- 5.5 mV
- Channel separation at 1 kHz
- 25 dB
- Channel balance at 1 kHz
- 1.5 dB
- Frequency response 20 Hz - 20 kHz
- 2 / - 1 dB
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 20 µm/mN
Stylus and Cantilever
- Stylus type
- Nude Elliptical
- Stylus tip radius
- r/R 8/18 µm
- Cantilever material
- Aluminium
- Tracking angle
- 20°
Electrical
- Coil system
- Quad-coils with split pole pins and OFC Coil Wire
- Coil wire material
- OFC Wire
- Internal impedance, DC resistance
- 1.3 kOhm
- Internal inductance
- 700 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Setup
- Tracking force range
- 1.6-2.0 g (16-20 mN)
- Tracking force, recommended
- 1.8 g (18 mN)
- Mounting type
- Half inch bottom mount
Physical
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/Blue
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g