2M Black Verso
Phono cartridge in Ortofon's 2M series, built for bottom-mount headshells. It is the top model of the 2M range, with a Nude Shibata stylus, for vinyl listeners who want detailed playback.
- Bottom-mount version of the 2M Black
- Nude Shibata diamond stylus, r/R 6/50 µm
- Aluminium cantilever, silver-plated OFC coil wire
- Split pole pin motor design
- Tracking force 1.4-1.7 g, 1.5 g recommended
- Output 5 mV, recommended load 47 kOhm
Zdjęcia
5Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi 2M Black Verso, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The 2M Black Verso is a moving-magnet phono cartridge from the 2M series, made for turntables with headshells that mount from underneath. It is the top model of the range and pairs a Nude Shibata diamond stylus with an aluminium cantilever. The slim, polished stylus profile gives a wide contact area with the groove walls.
The motor uses Ortofon's split pole pin design, upgraded with silver-plated copper coil wire. The 2M series is designed to fit the most common turntables in weight and size. The Verso variant uses a removable top plate, and the two M2.0 mm screws can be swapped in by following a step-by-step replacement guide. A Torx 8 key and a mounting tool are part of the process.
The cartridge weighs 7.2 g and is rated for a tracking force of 1.4-1.7 g, with 1.5 g recommended. It works with a standard moving-magnet phono input, with a recommended load of 47 kOhm and 150-300 pF. A downloadable user guide is available.
Specyfikacja
- Marka
- Ortofon
- Model
- 2M Black Verso
- Kategoria
- Sprzęt DJ-ski › Wkładki i igły
Electrical
- Output voltage at 1 kHz, 5 cm/sec
- 5 mV
- Channel balance at 1 kHz
- 1 dB
- Channel separation at 1 kHz
- 26 dB
- Frequency response 20 Hz - 20 kHz
- 2 / - 0 dB
- Internal impedance, DC resistance
- 1.2 kOhm
- Internal inductance
- 630 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Stylus and Tracking
- Stylus type
- Nude Shibata
- Stylus tip radius
- r/R 6/50 µm
- Cantilever material
- Aluminium
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 22 µm/mN
- Tracking force range
- 1.4-1.7 g (14-17 mN)
- Tracking force, recommended
- 1.5 g (15 mN)
- Tracking angle
- 20°
Construction
- Coil system
- Silver-plated OFC Coil Wire
- Coil wire material
- Silver-plated OFC Coil Wire
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/Black
- Mounting type
- Half inch bottom mount
Physical
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g