Annoncer
Har du en? Sælg den på Soundium Market
Billeder, pris, levering — 2 minutter. Køberen betaler via Soundium, og du får udbetaling til din bank.
Beskrivelse
The Mighty Bass 50BT combines a 6.5-inch full-range speaker with a Class D power amp in a compact cabinet. Its modeling engine provides three amp models, a set of bass cabinet impulse responses, compressors, drive and wah-type effects, modulation and four reverb types. Eight IR slots are left empty so that third-party impulse responses can be loaded through the Mighty Bass edit software.
A drum function and a 60-second phrase looper are included, and both can be triggered hands-free with the supplied NMP-2 dual footswitch. Bluetooth streams audio from a phone or tablet, and the free MightyAmp mobile app handles preset access, management and editing. Independent toggle switches decide whether the cabinet IR is applied to the amp output, the DI output, or both.
On the rear panel, a USB port serves as a recording interface and is also used for firmware updates and the edit software. A balanced DI output feeds an audio interface or PA system, and a footswitch jack takes the NMP-2. An auxiliary input is also listed in the specifications.
Specifikationer
- Mærke
- NUX
- Model
- Mighty Bass 50 BT
- Kategori
- Live-lyd › Forstærkere
Amplifier
- Type
- Modeling bass amp with IR
- Maximum output power
- 60W RMS
- Speaker
- 6.5", 4ohm, 60W, FRFR loud speaker
- Frequency response
- 40Hz ~ 16kHz
Sound engine
- Amp models
- MLD, AGL, BASSGUY
- Cab IRs
- AGL DB810, AMP SV212, AMP SV410+Tweeter, AMP SV810, Bassguy 410, Eden 410, MKB 410, TRC 410
- Empty IR slots
- 8 for 3rd party loading
- Third-party IR format
- 1024 samples
- EFX
- K Comp, Rose Comp, Touch Wah, Uni Vibe, Phase 100, RC Boost, TScream, Muff
- Modulation
- ST Chorus, Flanger, Phase 100
- Reverb
- Room, Hall, Plate, Spring
- Loop
- 60s phrase loop
Inputs
- Input impedance (INPUT)
- 1M ohms
- Input impedance (AUX-IN)
- 100K ohms
Outputs
- DI out
- Balanced, for interface or PA system
- IR toggle switches
- Independent for AMP and DI out
Connectivity
- USB
- Firmware update, edit software, recording
- Bluetooth
- Audio streaming
- Footswitch jack
- NMP-2 (TIP: loop, RING: drum)
- App
- MightyAmp (iOS/Android)
Power
- Power supply
- DC28V, 4A (Center Negative)
Physical
- Dimensions
- 300mm x 225mm x 326mm
- Weight
- 7.2 kg
In the box
- Included
- NMP-2 Dual Footswitch, TRS Cable (for NMP-2), Power Adaptor, User Manual
Dokumenter
PDF BrugsanvisningSpørgsmål
Ingen spørgsmål endnu — stil det første.