U 47 fet i
Large-diaphragm cardioid FET condenser microphone, a reproduction of Neumann's 1972 U 47 fet. It suits studio engineers recording vocals, guitar cabinets, kick drum, brass and bass instruments.
- Fixed cardioid large-diaphragm FET condenser
- K 47 capsule as in the original U 47
- Max SPL 137 dB, 147 dB with pad
- Pad, low cut and extra -6 dB output switch
- Large output transformer
- 48 V phantom powered, XLR output
Fotos
8Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um U 47 fet i, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The U 47 fet i is a reissue of the solid-state studio microphone first released in 1972 as the successor to the U 47 tube microphone. It uses the same K 47 large-diaphragm condenser capsule and headgrille design as the tube original, combined with a FET head amplifier and a large output transformer. The pattern is fixed cardioid.
It handles up to 137 dB SPL, or 147 dB with the -10 dB pad engaged, and has a stated dynamic range of 119 dB. The pad and low-cut switches are on the rear of the body. A further switch next to the XLR socket lowers the output level by 6 dB, which helps with vintage preamps that have little headroom. A one-sided swivel mount makes positioning easier.
The microphone connects over a balanced XLR output and runs on 48 V phantom power. It ships in a wooden box with a certificate and operating manual, in a nickel finish.
Vídeo
Especificações
- Marca
- Neumann
- Modelo
- U 47 fet i
- Categoria
- Estúdio › Microfones
Audio
- Acoustical operating principle
- Pressure gradient transducer
- Directional pattern
- Cardioid
- Frequency range
- 40 Hz ... 16 kHz
- Sensitivity at 1 kHz into 1 kohm
- 8 mV/Pa = –42 dBV ± 1 dB
- Equivalent noise level, CCIR
- 25 dB
- Equivalent noise level, A-weighted
- 18 dB-A
- Maximum SPL for THD 0.5%
- 137 dB
- Maximum SPL for THD 0.5% with preattenuation
- 147 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 69 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 76 dB
- Maximum output voltage
- -3.3 dBu
Outputs
- Rated impedance
- 150 ohms
- Rated load impedance
- 1 kohms
- Matching connector
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 0.5 mA
Physical
- Weight
- 710 g
- Diameter
- 63 mm
- Length
- 160 mm
- Color
- Nickel
- Catalogue number
- 006427
In the box
- Included
- U 47 fet i microphone, wooden box, certificate, operating manual