TLM 49
Neumann Scortha

TLM 49

Large-diaphragm cardioid condenser microphone that pairs the K 47 capsule and M 49-style open headgrille with transformerless FET electronics. It suits engineers who want a vintage-style vocal sound from a 48 V phantom-powered mic, with no tube power supply.

  • Fixed cardioid pattern, pressure-gradient transducer
  • K 47 capsule, as in the U 47 and M 49
  • Transformerless FET circuit voiced like a tube design
  • Self-noise 12 dB-A, S/N 82 dB (A-weighted)
  • Max SPL 110 dB at 0.5% THD, 129 dB at 5% THD
  • 48 V phantom powered, XLR output; EA 3 shock mount included
Díol ceann mar seo

Grianghraif

7

Fógraí

Níl aon fhógra don tsamhail seo fós

Nuair a dhíolann duine TLM 49, taispeánfar na fógraí agus stair na ndíolachán anseo.

Díol ceann mar seo

Cur síos

The TLM 49 is a fixed-cardioid pressure-gradient condenser microphone built around the K 47 capsule, the capsule design also used in the Neumann U 47 and M 49. It has the large, acoustically open headgrille of the M 49. Where those classics use tubes, this model has a transformerless solid-state head amplifier tuned to behave like a tube circuit.

The circuit is voiced to saturate softly at higher levels. Distortion is 0.5% at 110 dB SPL and rises gradually to 5% at 129 dB SPL. Self-noise is 12 dB-A. The sound has clear bass, a strong midrange and a gentle presence lift above 2 kHz. It is aimed mainly at vocals and also suits acoustic guitar and upright bass.

The microphone runs on standard 48 V phantom power (P48) and connects through a 3-pin XLR output, so no external power supply is needed. The set is finished in nickel and includes the EA 3 shock mount.

Físeán

Sonraíochtaí

Branda
Neumann
Samhail
TLM 49
Catagóir
Stiúideo › Micreafóin

Audio

Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
13 mV/Pa = –38 dBV ± 1 dB
Equivalent noise level, CCIR
23 dB
Equivalent noise level, A-weighted
12 dB-A
Signal-to-noise ratio, CCIR (re. 94 dB SPL)
71 dB
Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
82 dB
Maximum SPL for THD 0.5%
110 dB
Maximum SPL (5% THD)
129 dB

Outputs

Rated impedance
50 ohms
Rated load impedance
1 kohms
Maximum output voltage
-1 dBu

Connectivity

Matching connector
XLR 3 F

Power

Supply voltage (P48, IEC 61938)
48 V ± 4 V
Current consumption (P48, IEC 61938)
3.2 mA

Physical

Weight
825 g
Diameter
78 mm
Length
165 mm
Color
Nickel

In the box

Microphone
TLM 49
Shock mount
EA 3
Catalogue number
008550

Sonraí: neumann.com; grianghraif: Neumann product page · nuashonraithe 2026-10-12 · Botún aimsithe? Scríobh chugainn