KMS 104
Handheld cardioid condenser vocal microphone for stage use, built with a rugged housing and internal pop screen. Aimed at vocalists, and also usable on instruments and for home recording or broadcast.
- Condenser capsule with tight cardioid pattern
- Max SPL 150 dB for THD 0.5%
- Built-in pop screen, hardened steel headgrille
- Fixed low-cut filter compensates for proximity effect
- Transformerless 50 ohm output, cables up to 300 m
- Nickel or black finish; 48 V phantom powered
Billeder
5Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en KMS 104, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The KMS 104 is a vocal microphone that puts a true condenser capsule into a stage-ready body. It uses a tight, frequency-independent cardioid pattern with strong rejection of sound from the rear, which helps gain before feedback. The capsule handles sound pressure levels up to 150 dB, and the frequency response is smooth with an airy top end.
It is tuned for close miking. A fixed low-cut filter compensates for proximity effect, and the hardened steel headgrille contains an internal pop screen that also keeps moisture from the capsule. Handling noise is very low, and the head amplifier sits in a thick-walled housing. Besides lead vocals, the maker lists percussion, saxophone, trumpet, trombone, harmonica, acoustic guitar and guitar cabinets as suitable sources.
The output is transformerless and low impedance (50 ohms), which allows cable runs of up to 300 m. The mic needs 48 V phantom power and connects through a 3-pin XLR. It is supplied in nickel or black with an SG 105 stand clamp and a padded nylon bag.
Video
Specifikationer
- Mærke
- Neumann
- Model
- KMS 104
- Kategori
- Studie › Mikrofoner
Audio
- Transducer principle
- Pressure gradient transducer
- Directional pattern
- Cardioid
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 4.5 mV/Pa ± 1 dB equ. -47 dBV
- Maximum SPL for THD 0.5%
- 150 dB
- Equivalent noise level, A-weighted
- 18 dB-A
- Equivalent noise level, CCIR
- 28 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 76 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 66 dB
Outputs
- Rated impedance
- 50 ohms
- Rated load impedance
- 1 kohms
- Maximum output voltage
- 12 dBu
- Matching connector
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 3.5 mA
Physical
- Diameter
- 48 mm
- Length
- 180 mm
- Weight
- approx. 300 g
- Colour
- Nickel (KMS 104) or black (KMS 104 bk)
In the box
- Microphone
- KMS 104 or KMS 104 bk
- Stand clamp
- SG 105
- Carry bag
- Padded nylon bag