KH 810
Analog active studio subwoofer with a 10-inch woofer, 200 W amplifier and a bypassable 7.1 bass manager. It suits music, broadcast and post-production rooms that need bass down to 18 Hz for stereo, surround or 3D monitoring.
- 10" (265 mm) woofer with 200 W amplifier
- Bass response down to 18 Hz (±3 dB)
- Bypassable 7.1 bass manager, 80 Hz 4th-order crossover
- Max SPL 110.7 dB at 1 m (3% THD, 50–100 Hz average)
- Balanced XLR I/O with daisy-chain and sum outputs
- Remote control via NRC 1; REK 3 remote electronics kit
Ritratti
8Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ KH 810, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The KH 810 is a ported, wood-cabinet subwoofer built around a 265 mm long-throw woofer with a composite sandwich cone and magnetic shielding. The free-field response runs from 18 Hz (±3 dB), and the unit reaches a bass-capability maximum of 110.7 dB SPL at 1 m. A front-mounted port allows placement against a wall or flush mounting.
A built-in 7.1 bass manager can be bypassed, with a fourth-order 80 Hz crossover for compatibility with consumer formats from mono to 7.1. Eight analog channels, LFE gain of 0 or +10 dB and four LFE routing modes cover different system layouts. Controls include input gain, output level, an 8-position phase switch with test tone, a continuous low cut, a bypassable parametric EQ, a volume control and ground lift.
Inputs and outputs are electronically balanced XLR. A daisy-chain output and a sum output allow larger systems and Plane Wave Bass Array setups. It can be controlled with the NRC 1 hardware remote, with SEA 1 adapter and RS-232 control also listed. The optional REK 3 kit lets the electronics be located remotely. A universal 100–240 V power supply and a trigger input for remote power-on are included.
Vidjo
Speċifikazzjonijiet
- Marka
- Neumann
- Mudell
- KH 810
- Kategorija
- Studio › Monitors tal-istudio
Acoustics
- Free field frequency response ±6 dB
- 17 … 600 Hz
- Free field frequency response ±3 dB
- 18 … 300 Hz
- Self-generated noise at 10 cm
- <20 dB(A) SPL
- Sine wave output, THD < 0.5 % at 1 m in half space
- 95 dB SPL (>45 Hz)
- Max. SPL in half space at 3% THD at 1 m (50–100 Hz average)
- 110.7 dB SPL
- Max. long term SPL, pink noise at 2.3 m (single / pair full range)
- 112 dB SPL
- Dolby DARDT max SPL bass managed
- 119 dB
Audio
- Controller design
- Analog, active
- Crossover frequency
- 80 Hz
- Crossover slope
- 24 dB/oct; 4th order
- LFE gain
- 0 and +10 dB
- LFE routing modes
- 4
Inputs and Outputs
- Analog inputs and outputs
- XLR, electronically balanced
- Additional outputs
- Daisy chain output, Sum output
- Analog channels
- 8
Connectivity
- Remote control
- NRC 1 and SEA 1 hardware remote; RS-232 control possible
- Power-on trigger
- 0 V and 12 V trigger modes
Power
- Woofer amplifier output power (10% THD+N, limiter off)
- 200 W
- Woofer amplifier output power (0.1% THD+N, limiter off)
- 160 W
- Power consumption, idle (230 V / 100 V)
- 20 W
- Power consumption, full output (230 V / 100 V)
- 290 W
- Power supply
- Universal switched-mode, 100 … 240 V
Physical
- Woofer
- 265 mm (10") with magnetic shielding and black metal grille
- Cabinet material
- Wood cabinet, aluminum electronics panel
- Dimensions (H x W x D)
- 360 x 330 x 645 mm (14.2" x 13" x 25.4")
- External net volume
- 76.6 liters
- Weight
- 26 kg (57 lbs 5 oz)
- Operating conditions
- +10° C to +40° C; <75% RH, non-condensing
In the box
- KH 810 G delivery
- 1 x KH 810 Subwoofer, 3 x mains cables (EU, UK, US), 1 x Getting Started Quickly guide, 1 x Operating Manual
- KH 810 G CCC delivery
- 1 x KH 810 Subwoofer, 2 x mains cables (CCC + KC), 1 x Getting Started Quickly guide, 1 x Operating Manual
- Packed dimensions (H x W x D)
- 515 x 490 x 750 mm (20 1/4" x 19 1/4" x 29 1/2")
- Packed weight
- 32.0 kg (70 lbs 9 oz)