KH 310 II
The Neumann KH 310 II R+L is a pair of three-way, DSP-controlled active nearfield studio monitors with a sealed cabinet and 525 W of total amplification. It is aimed at engineers who need detailed midrange and accurate stereo, multichannel or immersive monitoring, with optional MA 1 room correction.
- Three-way active nearfield monitor, sealed cabinet
- 525 W total Class D amplification across three amps
- Analog XLR plus AES3id digital input and output on BNC
- DSP with MA 1 automatic room alignment support
- Free-field linearity ±0.6 dB from 100 Hz to 10 kHz
- Same form factor as the original KH 310
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine KH 310 II, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The KH 310 II is a redesigned version of the KH 310 three-way nearfield monitor. It uses an 8 1/4" woofer, a 3" soft-dome midrange driver and a 1" tweeter in a sealed cabinet, driven by three Class D amplifiers with 525 W of total power. Compared with the original model, the maker states a 5 dB higher maximum SPL, lower distortion and free-field linearity within ±0.6 dB between 100 Hz and 10 kHz.
An integrated DSP provides crossover, delay, equalisation and linear-phase FIR correction, and it supports MA 1 Automatic Monitor Alignment for frequency and phase correction in the room. Three acoustic controls (bass, low-mid and treble) and four output level settings allow adaptation to the listening position. Network control is available through MA 1 software.
Connections are an analog XLR input and AES3id digital input and output on BNC connectors. The cabinet keeps the dimensions of the original KH 310, so it can replace existing installations. It works with Neumann KH subwoofers for stereo, multichannel and Dolby Atmos setups. This listing covers the R+L pair; left and right monitors are also sold individually.
Físeán
Sonraíochtaí
- Branda
- Neumann
- Samhail
- KH 310 II
- Catagóir
- Stiúideo › Monatóirí stiúideo
Acoustics
- Free field frequency response ±3 dB
- 33 Hz … 21 kHz
- Free field frequency response ±6 dB
- 29 Hz … 21 kHz
- Frequency linearity deviation, 100 Hz–10 kHz
- ±0.6 dB
- Max. SPL, half space, 3% THD at 1 m
- 121.4 dB SPL
- Self-generated noise at 10 cm
- <20 dB(A) SPL
- Acoustic principle
- Sealed
- Recommended listening distance
- 1.0 … 2.5 m (3' … 8')
Drivers and Crossover
- Woofer
- 210 mm (8 1/4")
- Midrange
- 75 mm (3") with magnetic shielding
- Tweeter
- 25 mm (1") with protecting black metal grille
- Crossover frequency
- 700 and 1700 Hz
- Crossover slope
- 24 dB / oct
Inputs
- Analog input
- XLR: analog electronically balanced
- Analog input impedance
- >12k Ohms
- Digital input
- BNC (75 Ω): AES3id
- Input selector
- Analog; AES3id L; AES3id R; Mono
Outputs
- Digital output
- BNC (75 Ω): AES3id
- Output level settings (at 0 dBu input)
- 94; 100; 108; 114 dB SPL
Audio and DSP
- Digital converter resolution
- 24 Bit
- Digital sampling rate
- 32 kHz..200 kHz
- DSP resolution
- 32 Bit Audio, Processing 64 Bit double precision
- Latency, analog input / AES3id input
- 2.6 ms / 4.7 ms
- Automatic room calibration via MA 1
- Yes
Amplification and Power
- Woofer amplifier output (10% THD+N)
- 300 W
- Midrange amplifier output (10% THD+N)
- 160 W
- Tweeter amplifier output (10% THD+N)
- 125 W
- Mains power supply
- SMPS: 100-240 V; 50/60 Hz
- Power consumption, standby / idle / full output
- <300 mW / 26 W / 320 W
Connectivity and Control
- Control
- Local; Network
- Remote control
- Via Ethernet and MA 1
Physical
- Dimensions (H x W x D)
- 253 x 383 x 292 mm (10" x 15 1/8" x 11 1/2")
- Weight
- 13.0 kg (28 lbs 11 oz)
- Cabinet material
- Composite polycarbonate front, wooden sleeve, aluminum electronics panel
- Finish
- Metallic anthracite (RAL 7021) front / black (RAL 9005) back
- Mounting points
- 2 x M8 on side panels
In the box (per monitor)
- Mains cables
- 4 x black (EU/KR, UK, US and CN)
- Self-adhesive feet
- 4
- Documentation
- Safety Guide, Getting Started Quickly supplement, Operating Manual