Q6· Outros
The Q6 is a 600Ws battery-powered portable studio strobe with a 30W bi-color LED modeling lamp, TTL and HSS support, and a built-in 2.4G wireless receiver. It is aimed at location and outdoor portrait, event and commercial photographers who work with multiple off-camera lights.
- 600Ws battery-powered portable studio strobe
- 1/1 to 1/512 power in 0.1 stop steps
- TTL, M and Multi modes with 1/8000s HSS
- 2.4G Q system: 5 groups, 32 channels, 100m range
- 30W bi-color LED modeling lamp, 2700K–6500K, CRI 95+
- Up to 400 full-power flashes per battery
Fotos
8Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um Q6, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The Q6 is a 600Ws monolight with a rounded square body and a foldable handle. Output ranges from 1/1 to 1/512 in 0.1 stop steps, with colour temperature held at 5700K ±100K. Flash duration runs from 1/188s to 1/7633s, and recycling takes about 0.01–0.9s. A quartz flash tube is rated for around 300,000 flashes.
It works in TTL, M and Multi modes and supports Canon E-TTL II, Nikon i-TTL, Sony TTL and Fujifilm TTL systems. Other functions include 1/8000s high-speed sync, front and rear curtain sync, flash exposure compensation of ±3EV, an S1/S2 optical slave and a delay flash of 0.01–30s. The 30W LED modeling lamp is adjustable from 2700K to 6500K at CRI 95+. Two colour TFT screens show status with colour-coded groups.
Wireless control uses the NEEWER 2.4G Q system with QZ series triggers: 5 groups, 32 channels and 99 IDs over a range of up to 100m. An RX COMPAT mode works with Godox 2.4G X system transmitters, although the two systems cannot run at the same time. Bluetooth app control covers settings, groups and firmware. Power comes from a 28.8V/2900mAh lithium battery rated for up to 400 full-power flashes, or from an AC dummy battery.
Vídeo
Especificações
- Marca
- NEEWER
- Modelo
- Q6
- Categoria
- Outros
Flash output
- Power
- 600Ws
- Color temperature
- 5700K (+/-100K)
- Flash duration
- 1/7633s max
- Recycling time
- Approx. 0.01-0.9s
- Flash exposure compensation (FEC)
- -3EV to 3EV, 1/3 EV increments
- Full power flashes
- 400 (with modeling light off)
Modes
- Flash mode
- TTL/M/MULTI/BURST MODE
- Stroboscopic flash
- 1-100Hz, 1-100 times
- Sync mode
- High speed sync, front/rear curtain sync
- Delay flash
- 0.01-30s
Modeling lamp
- Modeling lamp (LED)
- 30W/2700K-6500K/CRI 95+
Wireless and triggering
- Wireless 2.4G Q system
- 32 Channels, 5 Groups (A, B, C, D, E)
- 2.4G transmission range
- 328'/100m
- Trigger method
- 2.4G, S1/S2, 3.5mm sync port
Power
- Power supply
- Lithium Battery, AC Dummy Battery
- Battery
- 28.8V/2900mAh lithium
- Energy saving
- Auto power off after 30-120 minutes of non-use
Interface and features
- Display screen
- Two color screens
- Built-in silent fan
- Yes
- Built-in buzzer
- Yes
- Flash duration display
- Yes
- Masking function
- Yes
Physical
- Lamp size (without handle)
- 7.7"x7.3"x6.7"/195x185x170mm
- Lamp weight (without handle)
- 6.6lb/3kg
In the box
- Included
- Q6 flash strobe, standard reflector, lithium battery, reflector cap, handle, power cord, power adapter, carrying case