CI 8-150 DSP V2
Eight-channel network power amplifier in a rack-mount chassis for installed audio systems, rated at 150 W per channel into 8 ohms with onboard DSP. Aimed at installers setting up multi-zone distributed audio and home theatre.
- 8 channels, 150 W each into 8 ohms, all driven
- 180 W per channel into 4 ohms
- Bridgeable channel pairs: 280 W into 8 ohms
- HybridDigital with custom Hypex nCore output stages
- Onboard DSP with Peak/RMS limiters and crossovers
- Web UI setup; signal sense and 12 V trigger
Billeder
7Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en CI 8-150 DSP V2, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The CI 8-150 DSP v2 is an eight-channel power amplifier built on NAD's HybridDigital platform with custom Hypex nCore output stages. Each channel is rated at 150 W continuous into 8 ohms with all channels driven, and 180 W into 4 ohms. Channel pairs can be bridged for higher output, for example to drive architectural subwoofers, giving 280 W continuous into 8 ohms in bridged mode.
Onboard digital signal processing lets an installer tune output per zone and per loudspeaker. It includes Peak and RMS limiters for speaker protection and crossovers for integrated subwoofers. Setup and monitoring are done through a web interface with a dashboard showing live status, power settings, I/O, zone configuration and DSP.
The amplifier has line-level and digital inputs. Power-up can be controlled through signal sense or a 12 V trigger, and standby draw is 0.5 W. The chassis is a rack-mount unit measuring 483 x 90 x 435 mm.
Specifikationer
- Mærke
- NAD
- Model
- CI 8-150 DSP V2
- Kategori
- Live-lyd › Forstærkere
Power output
- Continuous output power into 8 ohms
- 150 W (ref. 20 Hz-20 kHz at rated THD - all channels driven)
- Continuous output power into 4 ohms
- 180 W (ref. 20 Hz-20 kHz at rated THD - all channels driven)
- Continuous output power into 8 ohms at Bridged mode
- 280 W (ref. 20 Hz-20 kHz 0.02% THD - all channels driven)
- Clipping power (All channels driven)
- 160W(1kHz8ohms 0.1%THD)
- Clipping power into 8 ohms at Bridged mode
- 300 W (1 kHz 0.1 % THD - all channels driven)
- Peak output current
- 26A(1ohm,1ms)
IHF dynamic power
- All channels driven - 8 ohms
- 180W
- All channels driven - 4 ohms
- 280W
- Two channels driven - 8 ohms
- 200W
- Two channels driven - 4 ohms
- 360W
- Bridged mode, all channels driven - 8 ohms
- 520W
- Bridged mode, all channels driven - 4 ohms
- 670W
- Bridged mode, two channels driven - 8 ohms
- 600W
- Bridged mode, two channels driven - 4 ohms
- 800W
Audio
- THD (20 Hz – 20 kHz)
- 0.02% (1 W to 120 W, 8 ohms and 4 ohms)
- Signal-to-Noise Ratio
- 90 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
- Damping Factor
- 150 (ref. 8 ohms, 20 Hz to 6.5 kHz)
- Frequency Response
- ±0.5dB(20Hz-20kHz)
- Channel Separation
- 75 dB (1 kHz)
Inputs
- Maximum undistorted input level
- 3300 mV
- Input sensitivity (for 150 W in 8 ohms, maximum volume)
- 1450 mV
- Analog input audio sense threshold (one channel with signal)
- 3 ± 0.5 mVrms (ref. 100 Hz - 10 kHz)
- Trigger IN level
- 3-30Vdc
Power
- Standby power
- 0.5 W
Physical
- Gross dimensions (W x H x D)
- 483x90x435mm
- Shipping weight
- 17.6 kg (38.8 lbs)