CI 16-60 DSP V2
Sixteen-channel network power amplifier in a 2U rack chassis with HybridDigital amplification and onboard DSP, aimed at custom-install multi-zone and whole-home or commercial audio. Delivers 60 W per channel into 8 ohms, with bridgeable channel pairs.
- 16 channels of HybridDigital amplification in a 2U rack chassis
- 60 W per channel into 8 ohms, 65 W into 4 ohms (all channels driven)
- Bridgeable channel pairs: 140 W into 8 ohms
- Onboard DSP with Peak and RMS limiters
- Line-level inputs with loop outs; trigger input 3–30 Vdc
- Setup via web UI; 0.5 W standby power
Photos
8Listings
No listings of this model yet
When someone sells a CI 16-60 DSP V2, the listings and the sales history will show here.
Sell one like thisDescription
The CI 16-60 DSP V2 is a rack-mount amplifier built for distributed audio. It provides sixteen channels from a 2U chassis and uses HybridDigital amplification, which is intended to keep heat and energy use down for continuous operation. Output is rated at 60 W per channel into 8 ohms and 65 W into 4 ohms, with all channels driven. Channel pairs can be bridged to give 140 W into 8 ohms where a zone needs more headroom.
Onboard digital signal processing lets installers adjust the response to suit the speakers and room, balance output between zones and protect loudspeakers with Peak and RMS limiters. Setup is done through a web interface. Power ratings follow NAD's Full Disclosure Power approach, meaning continuous power with all channels driven into 8 ohms at rated THD.
For system integration it has line-level inputs with loop outs, plus trigger and control options for automation. It is presented as a companion to the NAD CI580v2 four-zone network music player and is suited to large multi-zone installations.
Specifications
- Brand
- NAD
- Model
- CI 16-60 DSP V2
- Category
- Hi-fi and home audio › Amplifiers
Amplifier output
- Continuous output power into 8 ohms
- 60 W (all channels driven, 1 kHz, 0.05% THD)
- Continuous output power into 4 ohms
- 65 W (all channels driven, 1 kHz, 0.05% THD)
- Continuous output power into 8 ohms, bridged mode
- 140 W (all channels driven, 1 kHz, 0.05% THD)
- Clipping power (all channels driven)
- 60 W (1 kHz, 8 ohms, 1% THD)
- Clipping power into 8 ohms, bridged mode
- 150 W (1 kHz, 1% THD, all channels driven)
- IHF dynamic power, all channels driven
- 8 ohms: 65 W
- IHF dynamic power, two channels driven
- 8 ohms: 70 W
- IHF dynamic power, bridged, all channels driven
- 8 ohms: 270 W
- IHF dynamic power, bridged, two channels driven
- 8 ohms: 280 W
- Peak output current
- 15 A (1 ohm, 1 ms)
Audio performance
- THD (1 W to 50 W, 8 ohms and 4 ohms)
- 0.05 % (20 Hz – 3 kHz)
- Signal-to-noise ratio
- 80 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
- Damping factor
- 110 (20 Hz to 1 kHz, 8 ohms)
- Frequency response
- ±1 dB (20 Hz – 20 kHz)
- Channel separation
- 60 dB (1 kHz)
Inputs
- Maximum undistorted input level
- 2900 mV
- Input sensitivity (50 W in 8 ohms, maximum volume)
- 760 mV
- Input impedance
- 20 kohms//220pF
- Analog input audio sense threshold (one channel with signal)
- 3 ± 0.5 mVrms (ref. 100 Hz – 10 kHz)
- Trigger IN level
- 3 - 30 Vdc
Power
- Standby power
- 0.5 W
Physical
- Dimensions (W x H x D)
- 483 x 100 x 435 mm
- Net weight
- 10.3 kg (22.7 lbs)
- Shipping weight
- 12.8 kg (28.2 lbs)
- Channels
- 16
- Rack height
- 2U