
C 388
Stereo integrated amplifier from NAD's Classic Series with 150 W per channel into 8 or 4 ohms, a built-in DAC, Bluetooth with aptX and an MM phono input. MDC slots allow optional streaming, HDMI and USB/DSD modules, for larger rooms and demanding loudspeakers.
- 150 W per channel into 8 or 4 ohms
- MDC slots for streaming, HDMI and USB/DSD modules
- Bluetooth A2DP with aptX
- MM phono input
- Optical and coaxial inputs, up to 24 bit/192 kHz
- 12V trigger, IR and RS-232 for custom install
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao C 388, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The C 388 is a stereo integrated amplifier using NAD's HybridDigital design. It is rated at 150 W continuous per channel into 8 or 4 ohms, with IHF dynamic power of 250 W, 350 W and 400 W into 8, 4 and 2 ohms. It is aimed at bigger rooms and speakers that need more drive.
Source connections include optical and coaxial digital inputs feeding the built-in DAC (up to 24 bit/192 kHz), analogue line inputs, an MM phono input and Bluetooth A2DP with aptX. Two MDC expansion slots accept optional modules for BluOS streaming, HDMI switching and USB/DSD playback.
Outputs cover Speaker A and B terminals, a preamp/subwoofer output and a headphone amplifier for low-impedance headphones. For custom installs there are 12V trigger in/out, IR in/out and an RS-232 port. Control is by IR remote or a smartphone app, and the unit is certified for several control systems including Control4, Crestron and Savant.
Videozapis
Specifikacije
- Marka
- NAD
- Model
- C 388
- Kategorija
- Hi-Fi i kućni audio › Pojačala
Amplifier
- Continuous power (4 and 8 ohms, stereo)
- >150W (at rated THD, 20-20kHz, both channels driven)
- IHF dynamic power
- 8 Ohm 250W; 4 Ohm 350W; 2 Ohm 400W
- THD (20Hz-20kHz)
- <0.02% (250mW to 150W, 8 Ohm and 4 Ohm)
- Signal/noise ratio
- >95dB (A-weighted, 500mV input ref. 1W out in 8 Ohm)
- Clipping power
- >160W (at 1kHz 0.1% THD)
- Peak output current
- >20A (in 1 Ohm, 1ms)
- Damping factor
- >150 (ref. 8 Ohm, 20Hz and 6.5kHz)
- Frequency response
- ±0.03 (20Hz-20kHz)
- Channel separation
- >75dB (1kHz); >70dB (10kHz)
- Input sensitivity (for 80W in 8 Ohm)
- Line In: 490mV; Phono In: 7.5mV; Digital In: 24% FS
Preamplifier
- THD (20Hz-20kHz)
- <0.005% at 2V out
- Signal/noise ratio
- >106dB (IHF; A-weighted, ref. 500mV out, unity gain)
- Input impedance
- 22 kilohm + 100pF
- Tone controls
- Treble: ±7.0dB at 20kHz; Bass: ±7.0dB at 60Hz; Balance: -10dB
Phono stage (MM)
- Input sensitivity
- 1.44mV (ref. 500mV out, Volume maximum)
- Maximum input signal at 1kHz
- >80mVrms (ref. 0.1% THD)
- Signal to noise ratio (MM cartridge)
- >76dB (IHF; A-weighted, ref. 500mV out)
Headphone amplifier
- THD (20Hz-20kHz)
- <0.005% at 1V out
- Signal/noise ratio
- >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)
- Output impedance
- 6 Ohms
Connectivity
- Digital inputs
- SPDIF coax and optical
- Analogue inputs
- Analogue line inputs; MM phono
- Outputs
- Speaker A, Speaker B, Preamp/Subwoofer out, Headphone
- Wireless
- Bluetooth A2DP with aptX
- Control
- 12V Trigger in/out; IR in/out; RS-232; IR remote; Smartphone Control App
- Expansion
- MDC slots for future upgrades
Audio
- Sample rate
- up to 24 bit/192kHz
- Bluetooth frequency band
- 2.402G - 2.480G
Power
- Standby (Auto Standby ON, Network Standby OFF)
- 0.5 Watts
- Standby (Auto Standby ON, Network Standby ON)
- 1.2 Watts
- Off mode
- 0.1 Watts
Physical
- Dimensions (W x H x D)
- 435 x 120 x 390mm (17 1/8 x 4 3/4 x 15 3/8)"
- Net weight
- 11.2kg (24.7lb)
- Shipping weight
- 13.6kg (30lb)