C 298
NAD Descontinuado

C 298

Stereo power amplifier built on Purifi Eigentakt amplification, rated at 185 W per channel into 8 ohms and bridgeable to a 620 W mono amp. It suits high-performance two-channel hi-fi systems that need balanced or single-ended inputs and installation-friendly control features.

  • Purifi Eigentakt amplification
  • 185 W per channel into 8 ohms, 340 W into 4 ohms
  • Bridges to mono: 620 W into 8 ohms
  • Balanced and single-ended analogue inputs
  • Line output for daisy chaining amplifiers
  • Auto turn-on, 12V trigger in/out, ground lug
Vender um igual

Fotos

8

Anúncios

Ainda não há anúncios deste modelo

Quando alguém vender um C 298, os anúncios e o histórico de vendas aparecem aqui.

Vender um igual

Descrição

The C 298 is a two-channel power amplifier that uses Purifi Eigentakt technology to keep noise and distortion low across the audible range. It is rated at 185 W per channel into 8 ohms and 340 W into 4 ohms in stereo mode, and it is described as stable with demanding loudspeaker loads.

The amplifier can be bridged into a mono unit delivering 620 W into 8 ohms, so a system can start with one unit and add a second later. Gain can be fixed or variable, and an input level control helps match it to different preamplifiers and sources.

On the back it has balanced and single-ended analogue inputs and a line output for daisy chaining further amplifiers. For custom and hidden installations it offers auto turn-on with a selectable signal-sensing threshold, 12V trigger input and output, and a ground lug.

Vídeo

Especificações

Marca
NAD
Modelo
C 298
Categoria
Hi-Fi e áudio doméstico › Amplificadores

Line input / line output

THD (20 Hz – 20 kHz)
<0.0005 % at 2V out
Signal-to-noise ratio
>120 dB (IHF; 20 Hz – 20 kHz, ref. 2V out)
Channel separation
>110 dB (1 kHz); >100 dB (10 kHz)
Input impedance
Single-ended: 56 kohms + 280 pF; Balanced: 56 kohms + 280 pF
Maximum input signal
>7.0 Vrms (ref. 0.1 % THD)
Output impedance
390 ohms
Frequency response
±0.1 dB (20 Hz - 20 kHz)
Maximum voltage output (IHF load)
≥7.0 V (ref. 0.1 % THD)

Speaker output

Rated power, stereo mode
185 W at 8 ohms; 340 W at 4 ohms
Rated power, bridge mode
620 W at 8 ohms
THD (20 Hz – 20 kHz)
<0.005 % (1 W to 185 W, 8 ohms and 4 ohms)
Signal-to-noise ratio
>98 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms); >120 dB (A-weighted, ref. 185 W out in 8 ohms)
Clipping power, stereo mode
>200 W (1 kHz, 0.1 % THD)
Clipping power, bridge mode
>690 W (1 kHz, 0.1 % THD)
IHF dynamic power, stereo mode
8 ohms: 260 W; 4 ohms: 490 W; 2 ohms: 570 W (1 kHz, 1 % THD)
IHF dynamic power, bridge mode
8 ohms: 1000 W; 4 ohms: 1100 W (1 kHz, 1 % THD)
Peak output current
>25 A (in 1 ohm, 1 ms)
Damping factor
>800 (ref. 8 ohms 20 Hz – 6.5 kHz)
Frequency response
±0.2 dB (20 Hz - 20 kHz); -3 dB at 60 kHz
Channel separation
>100 dB (1 kHz); >80 dB (10 kHz)

Gain and sensitivity

Stereo mode input sensitivity
Fixed Gain mode: 1.43 V (for 185 W in 8 ohms)
Stereo mode gain
Fixed Gain mode: 28.6 dB; Variable Gain mode: 8.5 dB – 28.5 dB
Bridge mode sensitivity
Fixed Gain mode: 3.78 V for 620 W in 8 ohms; Variable Gain mode at maximum: 1.41 V for 620 W in 8 ohms
Bridge mode gain
Fixed Gain mode: 25.4 dB; Variable Gain mode: 14.5 dB – 34.5 dB

Power

Standby power
<0.5 W

Physical

Dimensions (W x H x D)
435 x 120 x 390 mm (17 1/8 x 4 3/4 x 15 3/8 inches)
Net weight
11.2 kg (24.7 lbs)
Shipping weight
13.6 kg (30 lbs)

Dados: nadelectronics.com; fotografias: NAD product page · atualizado em 2026-10-13 · Encontraste um erro? Escreve-nos