810LP
Dual-input phono preamplifier from Moon with balanced XLR and RCA inputs and selectable gain for a wide range of cartridges. It is aimed at vinyl listeners who want fine input optimisation and a low-noise analog stage.
- XLR and RCA inputs, one pair of each
- 40 dB and 70 dB gain settings
- 5-point gel-based floating suspension for the circuit board
- i2DCf filtering with 24 inductors in the signal path
- Compatible with the 820S external power supply
- THD 0.0008% from 20 Hz to 20 kHz
Снимки
8Обяви
Още няма обяви за този модел
Когато някой продаде 810LP, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The 810LP amplifies the signal from a turntable cartridge to line level. It has one XLR and one RCA input pair, with gain settings of 40 dB and 70 dB that cover moving-magnet and low-output moving-coil cartridges. Input loading is adjusted with DIP switches, using the plastic tool supplied in the box.
The audio circuit board sits on a five-point gel-based floating suspension derived from the M-Octave technology of the 850P preamplifier, which is meant to isolate it from microphonics. Power supply regulation uses independent inductive DC filtering, with one inductor for each of the 24 ICs in the signal path. The board is a four-layer design with dedicated ground and power planes in pure copper, and the circuit uses metallized polypropylene film capacitors with 1% tolerance.
The unit has one XLR and one RCA output pair and can be used with the separate 820S external power supply.
Видео
Спецификации
- Марка
- Moon
- Модел
- 810LP
- Категория
- Hi-Fi и домашно аудио › Друга Hi-Fi техника
Inputs
- Inputs (XLR / RCA)
- 1 pair / 1 pair
- Input overload @40dB gain (XLR / RCA)
- 200mV RMS / 100mV RMS
- Input overload @70dB gain (XLR / RCA)
- 5mV RMS / 2.5mV RMS
Outputs
- Output impedance
- 50Ω
Audio
- S/N ratio (full scale @40dB gain)
- 115dBr
- S/N ratio (full scale @70dB gain)
- 95dBr
- IEC curve effect
- -7dB @ 10Hz
- Frequency response
- 20Hz - 20kHz ±0.1dB
- Crosstalk @ 1kHz
- -106dB
- THD (20Hz - 20kHz)
- 0.0008%
- Intermodulation distortion
- 0.001%
Power
- External power supply
- Compatible with 820S
- Voltage regulation
- i2DCf, 1 inductor per IC, 24 stages
Physical
- Shipping weight
- 40 lb / 18 kg
- Dimensions (W x H x D)
- 18.75 x 4.0 x 16.8 in (47.6 x 10.2 x 42.7 cm)
- Circuit board mounting
- 5-point gel-based floating suspension
- PCB
- Four-layer, pure copper ground and power planes
In the box
- Power cable
- AC power cable
- Tool
- Pen-shaped plastic hand tool for DIP-switch adjustments
- Documentation
- Owner's manual
- Registration
- Warranty and product registration information (USA and Canada only)