UltraGold
A moving-coil phono cartridge with a nude Shibata stylus and boron cantilever, made in Japan and voiced by Spiral Groove founder Allen Perkins. It suits vinyl listeners who want a detailed, wide-range MC cartridge that is simple to mount.
- Dual moving-coil stereo cartridge, made in Japan
- Nude Shibata stylus on a boron cantilever
- Output 0.4 mV, internal impedance 12 Ohm
- Frequency response 20–35,000 Hz
- Tracking force 1.8–2.2 g, weight 7.3 g
- Aluminum body with threaded inserts for two-screw mounting
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať UltraGold, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The UltraGold is a dual moving-coil stereo cartridge built in Japan. Its nude Shibata diamond sits on a boron cantilever, and the generator uses a neodymium magnet, a permendur yoke and PCOCC (Pure Copper by Ohno Continuous Casting) coils. Frequency response is stated as 20–35,000 Hz, with an output of 0.4 mV and an internal impedance of 12 Ohm.
The aluminum body has threaded inserts, so the cartridge can be fixed to a headshell or an integral tonearm with two screws, without bolts or nuts. Tracking force is 1.8–2.2 g and the weight is 7.3 g. Static compliance is 40 x 10e-6/dyne and dynamic compliance is 10 x 10e-6/dyne.
As a moving-coil design with a low output, it connects through a turntable's tonearm and phono stage that accepts MC cartridges, with a recommended load of 100 Ohm or higher. A manual and a brochure are available as downloads.
Video
Parametre
- Značka
- MoFi Electronics
- Model
- UltraGold
- Kategória
- DJ vybavenie › Prenosky a ihly
Cartridge
- Type
- Dual Moving Coil Stereo
- Stylus
- Shibata
- Stylus type
- Nude Shibata
- Cantilever
- Boron
- Magnet
- Neodymium
- Yoke
- Permendur
- Coils
- Pure Copper by Ohno Continuous Casting (PCOCC)
Audio
- Output voltage
- 0.4mV
- Frequency response
- 20–35,000Hz
- Internal impedance
- 12 Ohm
- Recommended load
- ≥ 100 Ohm
- Static compliance
- 40 x 10e-6/dyne
- Dynamic compliance
- 10 x 10e-6/dyne
Setup
- Tracking force
- 1.8–2.2g
- Mounting
- Two screws into threaded inserts, no bolts or nuts needed
Physical
- Weight
- 7.3g
- Body
- Aluminum cartridge body with threaded inserts
- Made in
- Japan
Downloads
- Documents
- UltraGold Manual, Cartridge Brochure