StudioSilver
MoFi Electronics Už sa nevyrába

StudioSilver

The StudioSilver is a dual moving-coil stereo phono cartridge with a nude MicroLinear stylus on a boron cantilever, assembled in Japan. It suits vinyl listeners who want a moving-coil upgrade for a turntable with a suitable phono stage.

  • Dual moving-coil stereo design
  • Nude MicroLinear stylus on boron cantilever
  • PCOCC pure copper coils
  • Neodymium magnet with permendur yoke
  • Aluminum body with threaded inserts
  • Assembled in Japan
Predať taký istý

Fotky

6

Inzeráty

Tento model zatiaľ nemá inzeráty

Keď niekto bude predávať StudioSilver, inzeráty a história predajov sa zobrazia tu.

Predať taký istý

Popis

The StudioSilver is a moving-coil stereo phono cartridge built around a nude MicroLinear stylus mounted on a boron cantilever. The generator uses a neodymium magnet with a permendur yoke, and the coils are wound from pure copper made by Ohno Continuous Casting (PCOCC). It is assembled in Japan.

The body is aluminum and has threaded inserts for mounting. Output voltage is 0.35 mV, frequency response runs from 20 Hz to 33,000 Hz, and the recommended tracking force is 1.8–2.2 g. The cartridge weighs 7.2 g, with an internal impedance of 12 ohms and a recommended load of 100 ohms or more.

As a low-output moving-coil design, it connects to the tonearm headshell in the usual way and needs a phono stage that accepts moving-coil cartridges. Static compliance is 40 x 10e-6/dyne and dynamic compliance is 10 x 10e-6/dyne, which helps when matching it to a tonearm.

Parametre

Značka
MoFi Electronics
Model
StudioSilver
Kategória
DJ vybavenie › Prenosky a ihly

Audio

Type
Dual Moving Coil (MC) Stereo
Output voltage
0.35mV
Frequency response
20–33,000Hz
Internal impedance
12 Ohm
Recommended load
≥ 100 Ohm

Stylus and Generator

Stylus
Nude MicroLinear
Cantilever
Boron
Magnet
Neodymium
Yoke
Permendur
Coils
Pure Copper by Ohno Continuous Casting (PCOCC)

Tracking

Tracking force
1.8–2.2g
Static compliance
40 x 10e-6/dyne
Dynamic compliance
10 x 10e-6/dyne

Physical

Weight
7.2g
Body
Aluminum cartridge body with threaded inserts
Made in
Precision-crafted in Japan

Údaje: mofielectronics.com; fotografie: MoFi Electronics product page · aktualizované 2026-10-13 · Vidíš chybu? Napíš nám