StudioSilver
The StudioSilver is a dual moving-coil stereo phono cartridge with a nude MicroLinear stylus on a boron cantilever, assembled in Japan. It suits vinyl listeners who want a moving-coil upgrade for a turntable with a suitable phono stage.
- Dual moving-coil stereo design
- Nude MicroLinear stylus on boron cantilever
- PCOCC pure copper coils
- Neodymium magnet with permendur yoke
- Aluminum body with threaded inserts
- Assembled in Japan
Ritratti
6Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ StudioSilver, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The StudioSilver is a moving-coil stereo phono cartridge built around a nude MicroLinear stylus mounted on a boron cantilever. The generator uses a neodymium magnet with a permendur yoke, and the coils are wound from pure copper made by Ohno Continuous Casting (PCOCC). It is assembled in Japan.
The body is aluminum and has threaded inserts for mounting. Output voltage is 0.35 mV, frequency response runs from 20 Hz to 33,000 Hz, and the recommended tracking force is 1.8–2.2 g. The cartridge weighs 7.2 g, with an internal impedance of 12 ohms and a recommended load of 100 ohms or more.
As a low-output moving-coil design, it connects to the tonearm headshell in the usual way and needs a phono stage that accepts moving-coil cartridges. Static compliance is 40 x 10e-6/dyne and dynamic compliance is 10 x 10e-6/dyne, which helps when matching it to a tonearm.
Speċifikazzjonijiet
- Marka
- MoFi Electronics
- Mudell
- StudioSilver
- Kategorija
- Tagħmir tad-DJ › Cartridges u stili
Audio
- Type
- Dual Moving Coil (MC) Stereo
- Output voltage
- 0.35mV
- Frequency response
- 20–33,000Hz
- Internal impedance
- 12 Ohm
- Recommended load
- ≥ 100 Ohm
Stylus and Generator
- Stylus
- Nude MicroLinear
- Cantilever
- Boron
- Magnet
- Neodymium
- Yoke
- Permendur
- Coils
- Pure Copper by Ohno Continuous Casting (PCOCC)
Tracking
- Tracking force
- 1.8–2.2g
- Static compliance
- 40 x 10e-6/dyne
- Dynamic compliance
- 10 x 10e-6/dyne
Physical
- Weight
- 7.2g
- Body
- Aluminum cartridge body with threaded inserts
- Made in
- Precision-crafted in Japan