Studio Vintage Head
A compact two-channel, all-valve 20W guitar amp head built in the UK, based on the tone of the Marshall 1959 plexi-era design. It suits guitarists who want a vintage plexi voice at home, in the studio or on the road, with a switch down to 5W.
- 20W all-valve head with switch down to 5W
- 2 EL34 power valves, ECC83 preamp valves
- Two channels, bridgeable with a patch cable
- Series switchable effects loop
- Five speaker outputs plus 1/4" DI output
- Made in UK; 9.25 kg
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Studio Vintage Head, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The Studio Vintage Head is a 20W valve guitar amp head from Marshall's Studio range, model SV20H. It reproduces the character of the 1959 Super Lead in a smaller, lighter chassis than the 100W version. Two channels, Normal and High Treble, can be used on their own or blended with a patch cable. The EQ section follows the 1959 layout, with treble, middle, bass and presence controls.
The power stage uses two EL34 valves, and the preamp uses ECC83 valves, including one as the phase splitter. A switch lowers the output from 20W to 5W, which makes it easier to use at lower volumes in a bedroom or rehearsal space. A series, switchable effects loop allows outboard effects to be placed after the preamp.
Four 1/4" instrument inputs cover high and low sensitivity. Five 1/4" speaker outputs support 16Ω, 8Ω and 4Ω loads, and a 1/4" jack DI output is provided. The amp is built in Marshall's factory in Bletchley, England, and ships with a detachable power cable and a speaker cable.
Wideo
Specyfikacja
- Marka
- Marshall
- Model
- Studio Vintage Head
- Kategoria
- Nagłośnienie › Wzmacniacze
General
- Model
- SV20H
- Range
- Studio
- Channels
- 2, bridgeable
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 20W (with power reduction option to 5W)
- Controls
- Normal/Loudness II, High Treble/Loudness I, Treble, Middle, Bass, Presence
- Built-in effects
- None
- Effects loop
- Yes, 1 x series switchable
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Inputs
- Instrument inputs
- 4 x 1/4" jack (high/low sensitivity)
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω / 8Ω / 4Ω load)
- DI output
- 1/4" jack
Physical
- Weight
- 9.25 kg / 20.4 lb
- Width
- 500 mm / 19.7"
- Height
- 240 mm / 9.4"
- Depth
- 230 mm / 9.1"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Power cable
- Detachable, included
- Speaker cable
- Included