Studio Vintage Combo
The Studio Vintage Combo (model SV20C) is a 20W all-valve 1x10" combo amp from Marshall's Studio range, built in the UK. It targets players who want vintage plexi-style tone at home or in the studio, with a switchable 5W power reduction for low-volume use.
- 20W all-valve combo with switchable 5W power reduction
- 1x10" Celestion VT-Junior speaker (16Ω, 50W)
- Two EL34 power valves, three ECC83 preamp/phase-splitter valves
- Series switchable effects loop
- Four instrument inputs and a 1/4" DI output
- Designed, engineered and made in the UK
Снимки
8Обяви
Още няма обяви за този модел
Когато някой продаде Studio Vintage Combo, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The Studio Vintage Combo is a two-channel, all-valve combo with an EL34 power section, rated at 20W and switchable down to 5W. It is voiced after the original 1959 plexi: players can use the high treble input, the normal input, or blend the two channels with a patch cable. Controls cover Normal/Loudness II, High Treble/Loudness I, Treble, Middle, Bass and Presence.
The amp has a Celestion VT-Junior 10" speaker (16Ω, 50W) in a 1x10" configuration. The preamp uses ECC83 valves, with a further ECC83 as phase splitter, and the power stage uses two EL34 valves. A series, switchable effects loop is included, and there are no built-in effects.
Four 1/4" instrument inputs with high and low sensitivity are fitted. Outputs are five 1/4" speaker jacks for 16Ω, 8Ω and 4Ω loads, plus a 1/4" DI output. The amp is designed, engineered and made in the UK, and a detachable power cable is supplied.
Видео
Спецификации
- Марка
- Marshall
- Модел
- Studio Vintage Combo
- Категория
- Китари и баси
General
- Model
- SV20C
- Range
- Studio
- Channels
- 2, bridgeable
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 20W (with power reduction option to 5W)
- Controls
- Normal/Loudness II, High Treble/Loudness I, Treble, Middle, Bass, Presence
- Effects
- None
- Effects loop
- Yes, 1 x series switchable
Speaker
- Speaker configuration
- 1x10"
- Speaker model
- Celestion VT-Junior (16Ω, 50W)
- Unit impedance
- 16Ω
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Inputs
- Instrument inputs
- 4 x 1/4" jack (high/low sensitivity)
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω / 8Ω / 4Ω load)
- DI output
- 1/4" jack
Physical
- Weight
- 15.9kg / 35 lbs
- Width
- 500mm / 19.7"
- Height
- 460mm / 18.1"
- Depth
- 245mm / 9.6"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Box contents
- Detachable power cable included