Studio Classic Head
Single-channel, all-valve 20W guitar amp head with a master volume, a switchable series FX loop and a power reduction option down to 5W. It is a compact UK-built head based on the JCM800 circuit, aimed at guitarists who want rehearsal and home-level volume.
- 20W all-valve head, switchable to 5W
- 2 x ECC83 + ECC83 splitter, 2 x EL34
- Single channel with master volume
- Series switchable FX loop
- High and low sensitivity inputs
- Made in UK; 9.4 kg
Fotos
8Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um Studio Classic Head, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The Studio Classic Head is a single-channel valve amplifier head built around the circuit of the Marshall JCM800. It uses two ECC83 preamp valves, one ECC83 phase splitter and two EL34 power valves, and is rated at 20W with a switch that drops the output to 5W for quieter rooms. A master volume sits alongside the preamp volume, so the amp can be pushed from clean tones to overdrive at different listening levels.
Tone is shaped with treble, middle, bass and presence controls. There are two 1/4" instrument inputs, one high and one low sensitivity, to suit different guitars and playing styles. A single series effects loop with a switch lets pedals or processors be placed after the preamp. The head is smaller and lighter than the original it is modelled on, and it is assembled in the maker's factory in Bletchley, England, with some hand-soldering.
For connections, the rear panel has five 1/4" speaker outputs covering 16Ω, 8Ω and 4Ω loads, plus a 1/4" DI output. The amp comes in black, with a detachable power cable and a speaker cable supplied.
Vídeo
Especificações
- Marca
- Marshall
- Modelo
- Studio Classic Head
- Categoria
- Som ao vivo › Amplificadores
General
- Model
- SC20H
- Range
- Studio
- Channels
- Single channel
- Colour
- Black
Audio
- Output wattage
- 20W (with power reduction option to 5W)
- Controls
- Preamp volume, master volume, treble, middle, bass, presence
- Built-in effects
- None
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Inputs
- Instrument inputs
- 2 x 1/4" jack (high/low sensitivity)
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω / 8Ω / 4Ω load)
- DI output
- 1/4" jack
Connectivity
- Effects loop
- Yes, 1 x series, switchable
Physical
- Weight
- 9.4 kg / 20.7 lb
- Width
- 510mm / 20.1"
- Height
- 240mm / 9.4"
- Depth
- 240mm / 9.4"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Power cable
- Detachable power cable included
- Speaker cable
- Included