Studio 900 Combo
A 20W two-channel valve combo amp from Marshall's Studio range, based on the JCM900 and built in the UK. It has a 1x12" Celestion speaker, built-in spring reverb and an effects loop, and suits guitarists who want crunch tones at studio or stage volumes.
- 20W valve combo with 5W and <1W attenuation
- Two channels, based on the JCM900
- Celestion G12T-75 12" speaker (16Ω, 75W)
- Built-in spring reverb and effects loop
- DI and compensated DI outputs
- Made in UK, weighs 17.9 kg
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao Studio 900 Combo, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The Studio 900 Combo is a compact two-channel guitar combo that carries over the sound of the JCM900 in a 20W format. The signal path uses two ECC83 preamp valves and an ECC83 phase splitter, with two 5881 valves in the power stage. The design pairs valve circuitry with solid-state components.
Each channel can be set up with its own settings, so the player can move between a clean sound and crunch sounds. Controls cover gain, EQ and volume, and a spring reverb is built in. A power attenuation switch lowers the output from 20W to 5W or below 1W for quieter playing. An effects loop is also fitted.
The amp has five 1/4" speaker output jacks covering 16Ω, 8Ω and 4Ω loads, plus a DI output and a compensated DI output for recording. The built-in speaker is a Celestion G12T-75 in a black cabinet. The amp is designed, engineered and made in the UK at Marshall's Bletchley factory.
Videozapis
Specifikacije
- Marka
- Marshall
- Model
- Studio 900 Combo
- Kategorija
- Gitare i bas-gitare
General
- Model
- SN20C
- Range
- Studio
- Channels
- 2
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 20W (with power reduction to 5W), <1W
- Reverb
- Built-in spring reverb
- Effects loop
- Built-in
Valves
- Preamp valves
- 2 x ECC83
- Phase splitter
- 1 x ECC83
- Power amp valves
- 2 x 5881
Speaker
- Speaker configuration
- 1 x 12"
- Speaker model
- Celestion G12T-75 (16Ω, 75W)
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- DI output
- Yes
- Compensated DI output
- Yes
Physical
- Weight
- 17.9 kg / 39.5 LB
- Width
- 510 mm / 20.1"
- Height
- 460 mm / 18.1"
- Depth
- 255 mm / 10"
- Country of origin
- Designed and engineered in UK. Made in UK.