Origin50 Head
The Origin50 Head is a 50W all-valve single-channel guitar amplifier head with switchable power reduction to approximately 10W and 5W. It suits guitarists who need one amp for stage, rehearsal and studio use at different volume levels.
- 50W all-valve head with 2 x EL34 power valves
- Power reduction to approx 10W or 5W
- Tilt control blends from normal to high treble
- Pull-boost gain and series-switchable FX loop
- DI output and three speaker outputs (16Ω / 8Ω)
- 2-way footswitch controls boost and FX loop
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať Origin50 Head, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The Origin50 Head is a single-channel valve guitar amp head built around two EL34 power valves and three ECC83 valves in the preamp and phase splitter. It runs at 50W in high power mode, with mid and low settings of roughly 10W and 5W. These settings use a voltage-rail reduction system, so the tone is meant to stay the same at lower volumes.
The front panel has Gain (with a pull boost), Tilt, Bass, Middle, Treble, Master and Presence controls, plus the power scaling switch. The Tilt control changes the blend of the sound from normal to a brighter, high-treble voicing, and is based on the multi-input approach of older designs. The gain boost adds an extra layer of gain for crunch tones. A 2-way footswitch can switch the gain boost and the FX loop on and off.
The back has a series-switchable effects loop for pedals, a DI output on a 1/4" jack, and three 1/4" speaker outputs for 16Ω or 8Ω loads. The head has a single 1/4" instrument input and a footswitch input, and a detachable power cable is included. It is finished in black and weighs 11.8 kg.
Video
Parametre
- Značka
- Marshall
- Model
- Origin50 Head
- Kategória
- Živý zvuk › Zosilňovače
General
- Model
- Origin50H
- Range
- Origin
- Channels
- 1
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- High power 50W, mid power approx 10W and low power approx 5W
- Power reduction
- Powerstem power scaling, 50W to 10W or 5W
- Controls
- Gain (pull boost), Tilt, Bass, Middle, Treble, Master, Presence, Powerstem power scaling
- Onboard effects
- None
- Effects loop
- Yes, 1 x series, switchable
Valves
- Preamp valves
- 2 x ECC83
- Phase splitter valve
- 1 x ECC83
- Power amp valves
- 2 x EL34
Inputs
- Inputs
- 1 x 1/4" jack instrument input, footswitch
Outputs
- Speaker outputs
- 3 x 1/4" jack sockets (16Ω load / 8Ω load)
- DI output
- DI (1/4" jack)
Physical
- Weight
- 11.8 kg / 26 LB
- Width
- 577 mm / 22.7"
- Height
- 228 mm / 9"
- Depth
- 225 mm / 8.9"
- Country of origin
- Designed and engineered in UK. Made in Vietnam.
In the box
- Box contents
- PEDL-90016 included
- Power cable
- Detachable power cable included