JVM410 Head
A 100W all-valve guitar amp head with four channels, each offering three modes for 12 distinct sounds from clean to heavy distortion. Built by hand in the UK, it suits professional players who want per-channel volume, two effects loops and MIDI control.
- 100W all-valve head with four channels
- Three modes per channel, 12 sounds in total
- Two FX loops: one series/parallel, one series
- Silent recording mode via emulated XLR line out
- MIDI In/Thru and footswitch input
- 4 x EL34 power valves; made in the UK
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur JVM410 Head birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The JVM410 Head is a four-channel, 100-watt valve amplifier head. Each channel has three selectable modes, giving twelve different voicings that range from clean to high-gain distortion. Every channel has its own gain, three-band EQ, volume and reverb settings, and a switchable master volume lets each channel sit at a different level. Settings can be stored, and the head carries a digital reverb.
Two effects loops are fitted, one series/parallel and one series, so pedals and outboard gear can be placed where they suit in the signal chain. A silent recording mode uses the emulated XLR line out together with the standby switch, so the amp can be recorded without driving a speaker cabinet.
The power stage uses four EL34 valves and the preamp uses ECC83 valves. Speaker connection is through five 1/4" sockets covering 16, 8 and 4 ohm loads. MIDI In, MIDI Thru and a footswitch input handle remote control. The head is designed, engineered and hand-assembled in the maker's UK factory and is finished in black.
Myndband
Tækniupplýsingar
- Framleiðandi
- Marshall
- Líkan
- JVM410 Head
- Flokkur
- Gítarar og bassar
General
- Model
- JVM410 HEAD
- Range
- JVM
- Channels
- 4 (Multi)
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 100W
- Effects
- Digital reverb
- Effects loop
- 2, 1 x series parallel, 1 x series
- Preamp valves
- 4 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 4 x EL34
Controls
- Controls
- Channel and mode select (button), gain, treble, middle, bass, volume and reverb (per channel), presence, resonance, master volume select, master volume (switchable for each channel)
Inputs
- Instrument input
- 1 x 1/4" jack
- MIDI
- MIDI In
- Footswitch
- Footswitch input
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- Line out
- Emulated Line Out (XLR)
- MIDI
- MIDI Thru
Physical
- Weight
- 22 kg / 49 LB
- Width
- 740 mm / 29.1"
- Height
- 310 mm / 12.2"
- Depth
- 215 mm / 8.5"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Footswitch
- PEDL-91016 included
- Power cable
- Detachable power cable included
- Speaker cable
- Speaker cable included