JCM800 2203 Vintage Reissue Head
Single-channel, all-valve 100W amplifier head from Marshall's Vintage Reissue range, built in the UK. It has a master volume and a serial effects loop, and suits guitarists who want classic rock and metal gain with some control over volume.
- 100W all-valve single-channel head
- Master volume for saturation at lower levels
- Switchable series FX loop
- 4 x EL34 power valves, 3 x ECC83 preamp valves
- Selectable 16Ω / 8Ω / 4Ω speaker load
- Designed and made in the UK
Fotos
8Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um JCM800 2203 Vintage Reissue Head, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The JCM800 2203 is a single-channel, 100W all-valve guitar head. A master volume lets the player reach power-valve saturation at lower volume levels, and the preamp and master controls can be balanced for clean through crunch settings.
The front panel offers preamp volume, master volume, treble, middle, bass and presence controls. There are two 1/4" instrument inputs, one high sensitivity and one low. The valve complement is three ECC83 in the preamp section (including the phase splitter) and four EL34 in the power section. This reissue adds a switchable series effects loop, placed between the preamp and power amp so that effects sit after the preamp gain stage.
On the back, two 1/4" jack speaker outputs have a selectable 16Ω, 8Ω or 4Ω load. The head is finished in black and gold, weighs 20.5 kg and is made in the UK. A detachable power cable and a speaker cable are included.
Vídeo
Especificações
- Marca
- Marshall
- Modelo
- JCM800 2203 Vintage Reissue Head
- Categoria
- Guitarras e baixos
General
- Model
- JCM800 2203 Vintage Reissue Head
- Range
- Vintage reissue
- Channels
- 1
- Technology
- Valve
- Colour
- Black and Gold
Audio
- Output wattage
- 100W
- Controls
- Preamp volume, master volume, treble, middle, bass, presence
- Effects
- None
- Effects loop
- Yes, 1 x serial switchable
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 4 x EL34
Inputs
- Instrument inputs
- 2 x 1/4" jack (high/low sensitivity)
Outputs
- Speaker outputs
- 2 x 1/4" jack, selectable 16Ω / 8Ω / 4Ω load
Physical
- Weight
- 20.5 kg / 45 lb
- Width
- 740 mm / 29.1"
- Height
- 315 mm / 12.4"
- Depth
- 210 mm / 8.3"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Power cable
- Detachable power cable included
- Speaker cable
- Included