DSL100 Head
Two-channel all-valve 100W guitar amplifier head with a switchable 50W mode, two master volumes, digital reverb, a series effects loop and MIDI control. Suited to guitarists who want switchable gain voicings for rehearsal, stage and home use.
- All-valve head, 100W with switch to 50W
- Two channels, each with two modes
- Two master volume controls
- Five speaker outputs, 16Ω / 8Ω / 4Ω
- Digital reverb and switchable series FX loop
- MIDI control via 3.5mm jack
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao DSL100 Head, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The DSL100 Head is a valve guitar amplifier head rated at 100W, with a switch that lowers output to 50W. It has two channels, a Classic Gain channel with a clean/crunch switch and an Ultra Gain channel with an OD1/2 switch, so each channel offers two modes. Shared tone controls cover bass, middle, treble, presence and resonance, with a tone shift switch and separate digital reverb controls for each channel.
The power section uses four EL34 valves, and the preamp uses three ECC83 valves plus one ECC83 as phase splitter. Two master volume controls, selected with a master select switch, let the player store two output levels. A single series effects loop can be switched on and off.
For connections there are five speaker outputs on 1/4" jacks, which accept 16Ω, 8Ω or 4Ω loads, and an emulated line output. A 1/4" instrument input is joined by a 3.5mm jack that serves as Aux in, MIDI in and footswitch input, so the amp can be operated from MIDI equipment. The head is finished in black and ships with a detachable power cable and a footswitch (PEDL-90012).
Videozapis
Specifikacije
- Marka
- Marshall
- Model
- DSL100 Head
- Kategorija
- Live zvuk › Pojačala
General
- Model
- DSL100HR
- Range
- DSL
- Technology
- Valve
- Channels
- 2, each with 2 modes
- Colour
- Black
Audio
- Output wattage
- 100W (with power reduction option to 50W)
- Effects
- Digital reverb
- Effects loop
- Yes, 1 x series switchable
- Preamp valves
- 3 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 4 x EL34
Inputs
- Instrument input
- 1 x 1/4" instrument jack
- Aux in / MIDI in / footswitch
- 1 x 3.5mm jack
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- Line out
- 1 x 1/4" jack emulated line out
Controls
- Classic Gain channel
- Gain, Volume, Clean/Crunch switch
- Ultra Gain channel
- Volume, Gain, OD1/2 switch
- Tone controls
- Treble, Middle, Bass, Tone Shift switch, Presence, Resonance
- Reverb
- Separate for Classic Gain and Ultra Gain channels
- Master section
- Master Select switch, Master Volume I, Master Volume II
- Loop
- Loop on/off switch
Physical
- Weight
- 24.2 kg / 53 lb
- Width
- 740 mm / 29.1"
- Height
- 274 mm / 10.8"
- Depth
- 242 mm / 9.5"
- Country of origin
- Designed and engineered in UK. Made in Vietnam.
In the box
- Box contents
- PEDL-90012 included; detachable power cable included