1987X Vintage Reissue Head
A 50-watt, all-valve, two-channel guitar amplifier head from Marshall's Vintage Reissue range, built in the UK. It recreates 1970s plexi-style tones and adds an FX loop, and is aimed at guitarists who want classic overdrive and clean sounds.
- 50W all-valve head with two EL34 power valves
- Two bridgeable channels
- Series-switchable FX loop
- Four 1/4" inputs, high/low sensitivity
- Speaker load selectable 16Ω / 8Ω / 4Ω
- Designed and made in the UK
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi 1987X Vintage Reissue Head, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The 1987X is a 50W valve head that reproduces the classic plexi sound of the 1970s, from clean tones through to crunch and overdrive. Unlike the original 1987, it offers two bridgeable channels and a series effects loop that can be switched on or off. The power section uses two EL34 valves, and the preamp uses ECC83 valves, including one as the phase splitter.
Tone is shaped with Normal/Loudness II and High Treble/Loudness I controls, plus Treble, Middle, Bass and Presence. Four 1/4" instrument inputs with high and low sensitivity are fitted. Two 1/4" speaker outputs can be set to a 16Ω, 8Ω or 4Ω load.
The head is built at Marshall's factory in Bletchley, England, in black. A detachable power cable and a speaker cable are supplied. Its enclosure measures 660 mm wide and weighs 15.3 kg.
Wideo
Specyfikacja
- Marka
- Marshall
- Model
- 1987X Vintage Reissue Head
- Kategoria
- Nagłośnienie › Wzmacniacze
General
- Model
- 1987X Vintage Reissue Head
- Range
- Vintage reissue
- Technology
- Valve
- Channels
- 2, bridgeable
- Colour
- Black
Electronics
- Output wattage
- 50W
- Effects
- None
- Effects loop
- Yes, 1 x series switchable
- Controls
- Normal/Loudness II, High Treble/Loudness I, Treble, Middle, Bass, Presence
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Inputs
- Instrument inputs
- 4 x 1/4" jack (high/low sensitivity)
Outputs
- Speaker outputs
- 2 x 1/4" jack, selectable 16Ω / 8Ω / 4Ω load
Physical
- Weight
- 15.3 kg / 34 lb
- Width
- 660 mm / 26"
- Height
- 260 mm / 10.2"
- Depth
- 205 mm / 8.1"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Power cable
- Detachable power cable included
- Speaker cable
- Included