5805· Wzmacniacze
Integrated amplifier that combines a preamplifier, MM/MC phono stage, ESS Sabre-based DAC and class AB power amplifier in one chassis. It suits listeners who want to run vinyl, digital and Bluetooth sources into a single high-end stereo system.
- 125 W/ch at 8 ohms, nearly 250 W/ch at 4 ohms, stable to 2 ohms
- Built-in MM/MC phono stage with hybrid gain topology
- PrecisionLink II DAC: ESS Sabre 32-bit, PCM 384 kHz, DSD 11.2 MHz
- MQA decoding on all digital inputs, Bluetooth with aptX HD
- XLR and RCA line inputs, front 6.35 mm headphone output
- Ethernet, RS-232, 12V trigger and IR control ports
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi 5805, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The № 5805 is a hybrid integrated amplifier with a discrete, direct-coupled preamp, a class AB power section and a phono input for MM or MC cartridges. The power stage is fed by an oversized toroidal transformer of 500+ VA with separate secondary windings per channel. It is rated at 125 W per channel into 8 ohms and nearly 250 W into 4 ohms, and it stays stable down to 2 ohms.
The digital section uses the PrecisionLink II DAC with a 32-bit ESS Sabre converter. It has one asynchronous USB, one coaxial and two optical inputs, handles PCM up to 32 bit/384 kHz and DSD up to 11.2 MHz, and decodes MQA. A Bluetooth receiver supports aptX HD. The line stage can drive headphones directly from the front-panel 6.35 mm jack.
Analog connections are one balanced XLR and two RCA line inputs, an RCA phono input, a variable RCA line output and two pairs of speaker terminals. Ethernet, RS-232, 12 V trigger and IR ports allow system integration. Setup, configuration backup and firmware updates are available through an internal web page, and a Kontrol app and an IR remote are supported.
Wideo
Specyfikacja
- Marka
- Mark Levinson
- Model
- 5805
- Kategoria
- Hi-Fi i audio domowe › Wzmacniacze
Digital inputs
- USB
- 1 x USB 2.0 (USB-B), asynchronous
- Coaxial S/PDIF
- 1 x RCA
- Optical S/PDIF
- 2 x Toslink
- PCM / DSD support
- 384kHz/32 bit PCM and DSD 11.2MHz
- Bluetooth
- Audio input including aptX HD
- MQA
- Full decoding on all digital inputs including asynchronous USB
Analog inputs
- Balanced line
- 1 x XLR stereo
- Single-ended line
- 2 x RCA stereo
- Phono
- 1 x RCA (MM/MC)
- Home theater
- HT processor pass-thru mode
Outputs
- Line output
- 1 x RCA stereo (variable)
- Headphone output
- 1 x 1/4-inch/6.35mm jack (front panel)
- Speaker outputs
- 2 pairs high-current binding posts
Audio
- Output power at 8 ohms
- 125W/channel
- Output power at 4 ohms
- nearly 250W/channel
- Load stability
- Stable operation down to 2 ohms
- Amplifier class
- Class AB, fully discrete, direct-coupled
- DAC
- Mark Levinson PrecisionLink II, ESS Sabre 32-bit
Control and connectivity
- Network
- Ethernet (RJ-45)
- Serial
- RS-232 (DB9)
- Trigger
- 12V DC trigger input and output (3.5mm jack), output 100mA maximum
- IR input
- 3.5mm jack
- Remote and app
- Handheld IR remote, Mark Levinson Kontrol app for Android and iOS
Power
- Mains voltage
- 100VAC, 115VAC, or 230VAC, factory set
- Power transformer
- 500+ VA toroidal
- Standby, Green mode
- <0.4W
- Standby, Power Save mode
- 7W
- Standby, Normal mode
- 70W
- Power on, quiescent
- 120W
- Power on, maximum
- 500W
Physical
- Dimensions (H x W x D)
- 5.72"/145mm x 17.25"/438mm x 19.98"/507mm
- Height without feet
- 5.25"/133mm
- Weight
- 62 lbs/28.1kg
- Packed dimensions (H x W x D)
- 13.0"/330mm x 24.0"/610mm x 28.0"/711mm
- Packed weight
- 73 lbs/33.0kg
- Origin
- Designed and handcrafted in the USA
In the box
- Remote control
- Solid aluminum IR remote included