534
Mark Levinson Scortha

534· Méadaitheoirí

Stereo power amplifier with a dual-monaural, fully balanced Pure Path design, rated at 250 W per channel into 8 ohms and 500 W into 4 ohms. Suited to hi-fi systems that pair it with a separate preamplifier and need network or custom-install control.

  • 250 W/ch into 8 ohms, 500 W/ch into 4 ohms, 2-ohm stable
  • Dual-monaural, fully balanced Pure Path discrete design
  • Class A for most listening, class A/B at higher volumes
  • Balanced and single-ended inputs
  • Ethernet, RS-232, USB and 12 V trigger control
  • Designed and handcrafted in the USA
Díol ceann mar seo

Grianghraif

8

Fógraí

Níl aon fhógra don tsamhail seo fós

Nuair a dhíolann duine 534, taispeánfar na fógraí agus stair na ndíolachán anseo.

Díol ceann mar seo

Cur síos

The № 534 is a dual-monaural stereo power amplifier built around a discrete, direct-coupled, fully differential signal path. It is rated at 250 W per channel into 8 ohms and 500 W into 4 ohms, stays stable into 2-ohm loads, and uses very little negative feedback. The output stage works in class A for most listening conditions and moves to class A/B at higher volumes.

Power comes from a shielded, encapsulated toroidal transformer. The gain stage uses a folded cascode arrangement of JFET and bipolar transistors, with tantalum nitride thin-film resistors and film capacitors in critical positions. The chassis is made of 6063-T5 extruded aluminum. The amplifier is designed and handcrafted in the USA.

Inputs are one balanced pair and one single-ended pair, so it works with most preamplifiers or sources with variable output. Speakers connect to four pairs of gold-plated Hurricane binding posts that accept standard or bi-wired cabling. Ethernet/IP, RS-232, USB and 12 V trigger in and out allow integration into control systems and web-based monitoring and configuration.

Físeán

Sonraíochtaí

Branda
Mark Levinson
Samhail
534
Catagóir
Hi-Fi agus fuaim an tí › Méadaitheoirí

Inputs

Input connectors
One pair balanced, one pair single-ended
Input impedance
60 kΩ balanced; 30 kΩ unbalanced
Voltage gain
26dB
Input sensitivity
2.83VRMS output at 142mVRMS input

Outputs

Speaker connectors
Four pairs of Hurricane loudspeaker outputs, banana-plug sockets per channel, except on 230 VAC version

Audio

Rated output power (8 Ω)
250 wpc RMS @ 8Ω, 20Hz to 20kHz @ <0.3% THD, full output from 2.83VRMS
Rated output power (4 Ω)
500 wpc into 4 ohms
Load stability
2-ohm stability
Frequency response
10Hz to 20kHz ±0.2dB
Signal-to-noise ratio
>85dB, reference level 2.83 VRMS
Operating class
Class A for most listening conditions, class A/B at higher volumes

Connectivity

Control I/O
Ethernet, RS-232, Trigger In and Out, USB-A, Mini USB
System integration
Ethernet, IP, RS-232, triggers, web monitoring and control

Power

Power requirements
100V~, 120V~, 230V~, factory set for destination country, 1500W

Physical

Height (with feet)
7.75” (19.7cm)
Height (without feet)
7” (17.8cm)
Width
17.75” (45.1cm)
Depth
20” (50.8cm)
Net weight
107 lbs (48.5kg)
Shipping weight
124 lbs (56.3kg)
Chassis
6000-series aluminum chassis (6063-T5 extruded aluminum)

Doiciméid

PDF Lámhleabhar úsáideoraPDF · ón déantóir

Sonraí: marklevinson.com; grianghraif: Mark Levinson product page · nuashonraithe 2026-10-14 · Botún aimsithe? Scríobh chugainn